Operating procedures, Camera control functions, Pan/tilt control – Panasonic WV-CU161 Manuel d'utilisation

Page 24: Lens control, ª” ¶ e joystick

Advertising
background image

24

CAMERA CONTROL FUNCTIONS

It is necessary to setup the camera before using the cam-
era control functions. For further information, refer to the
Operating Instructions for the respective combination cam-
era (See page 30). You can also set it up from Camera
Setup menu if you operate a system.

Pan/Tilt Control

The following function is available with a combination cam-
era or pan/tilt head.

Move the pan/tilt head in the desired direction using the
joystick.
The camera can be moved in eight directions.

To move the pan/tilt head slowly, move the joystick while
holding down the

SLOW/CAMERA FUNCTION

button.

Note:

The SLOW/CAMERA FUNCTION button cannot be

used in the camera or pan/tilt head which is not provid-
ed with 8-steps speed.

OPERATING PROCEDURES

ª

E

Joystick

Lens Control

The following functions are available with cameras provided
with controllable lens.

1. Press the

FOCUS NEAR

or

FOCUS FAR

button to

adjust the lens focus while watching the monitor.

NEAR

FAR

FOCUS

AUTO FOCUS

If you are using a camera with an auto focus feature,
the lens focus can be automatically adjusted by press-
ing the

FOCUS NEAR

and

FOCUS FAR

buttons simul-

taneously.

2. Press the

ZOOM TELE

button to optically bring the

object closer, or press the

ZOOM WIDE

button to opti-

cally widen the scene.

WIDE

TELE

IRIS

ZOOM

CLOSE

OPEN

IRIS RESET

Focal length differs depending on the lens installed on
the camera.

3. Press the

SHIFT

button.

SHIFT

4. Press the

ZOOM/IRIS

buttons to adjust the lens focus

while watching the monitor.
If the

IRIS CLOSE

and

IRIS OPEN

buttons are pressed

for approx. 1 sec. or more simultaneously, the iris is
reset to the default.

WIDE

TELE

IRIS

ZOOM

CLOSE

OPEN

IRIS RESET

Advertising