Print reduction, Selecting the print reduction mode, Receiving documents – Panasonic UF-890 Manuel d'utilisation

Page 62: Print reduction selecting the print reduction mode

Advertising
background image

Receiving Documents

62

This machine can use Letter, Legal or A4 size plain paper for recording. Sometimes, oversized documents
sent to you by the other parties cannot be printed within a single page. When this occurs, the document will
be divided into separate pages.

This machine is equipped with a Print Reduction function to solve this problem. You may select the most
appropriate setting from the selections described below.

1. Automatic Reduction

Each page of a received document is first stored in memory. Based on the document length, your
machine will automatically calculate the suitable reduction ratio (70% to 100%) to print the entire
document on a single page. If the received document is extremely long (over 39% longer than the
recording paper), the document will be divided into separate pages and print without reduction.

2. Fixed Reduction

You can pre-determine the reduction ratio from 70% to 100% in 1% steps. The document(s) you receive
will be reduced to the fixed ratio regardless of size.

Set Fax Parameters as shown below.
1. To set Automatic Reduction mode.

1) No. 24 Print Reduction set to “Auto”.

2. To set Fixed Reduction mode.

1) No. 24 Print Reduction set to “Fixed”.
2) No. 25 Reduction Ratio set to any number between 70% through 100%. (See Note 1)

Ex: A4 to A4 - 96%

A4 to Letter - 90%
Letter to Letter - 96%
Legal to Letter - 75%

NOTE

1. If the sending side is set to print the header on the outside of the copy area, more reduction

ratio will be required.

Print Reduction

Selecting the Print Reduction Mode

Advertising