Panasonic UF-890 - Manuel (Page 158)

Options and Supplies
158
Before installing, make sure that there is no document file(s) stored in the memory. You may confirm by
printing out a File List (See page 78). When the memory card is installed, the machine will initialize the
document memory, all contents stored in the document memory at that time will be lost.
NOTE 1. The document(s) stored in memory will be lost if the memory card is removed.
2. The memory size on Fax Parameter No.99 is only shown for the Flash Memory Card.
Installing the Memory Card (Flash Memory Card and/or DRAM Card)
1 (1) Turn the Power Switch to the "O" (OFF)
position located in the rear of the machine.
(2) Open the ADF Door.
(3) Remove a Screw.
(4) Remove the Memory Card Cover.
2 Insert the Memory Card(s) gently into the card
slot with the Panasonic logo facing to the rear.
Caution: Installing the Memory Card(s) in
the wrong direction may damage
the connecting pins inside the
machine.
3 (1) Re-install the Memory Card Cover and the
Screw to secure the Cover.
(2) Close the ADF Door.
4 Turn the Power Switch to the "I" (ON) position.
Print out the Fax Parameter List (See page
138) and confirm that the memory size on Fax
Parameter No. 99. (See page 39 and the Note 2
below)
2
3
Memory Card Cover
D-RAM
FLASH
1
2