Panasonic TQBJ0302 - Manuel (Page 45)

NETWORK menu (PT-LB90NTU only)
Settings
E
NGLISH - 45
NETWORK menu
(PT-LB90NTU only)
Navigating through the MENU ( Æ page 27),
select NETWORK from the main menu and then
select the required item from the sub-menu.
Set the selected item with◄►buttons. z
Remote control Control panel
Remarks
These items are set for network connection with a z
computer. For details of the PJ Link and network,
see “NETWORK operation manual” in the CD-ROM
provided.
WIRED LAN
J
You can set a wired LAN.
WIRELESS LAN
J
You can set a wireless LAN.
NAME CHANGE
J
You can change the name of the projector.
INPUT PASSWORD
J
When checking the password for the network
connection, you must turn this function ON.
PASSWORD CHANGE
J
You can change the password for the network
connection.
NETWORK CONTROL
J
When controlling the projector with a computer on
the network, you must turn this function ON.
LIVE MODE CUT IN
J
Set this function to ON to allow other users to
connect to live mode while the projector is operating
in the live mode of the network.
COMPUTER SEARCH
J
You can search for a computer on the network.
MULTI-LIVE
J
This function is available when a network input
signal is detected.
STATUS
J
You can display the status of the network setting.
INITIALIZE
J
You can reset the settings of the network to the
factory default settings.
Remarks
When z PASSWORD in the SECURITY menu is
activated or the network setting is initialised, you
will be required to input the password.