Panasonic TQBJ0302 - Manuel (Page 42)

PROJECTOR SETUP menu
Settings
42 -
E
NGLISH
TEST PATTERN
You can use the 7 different test patterns to adjust
the focus of the image. Press the ENTER button to
display the test pattern.
Change
pattern
Change
pattern
Press the MENU or RETURN button to return to the
PROJECTOR SETUP menu, or press repeatedly to
escape the menu mode.
Remarks
The initial screen is an all white pattern. Only when z
TEST PATTERN is assigned to the FUNCTION
button, the lattice pattern will display in the initial
screen.
INITIALIZE ALL
You can reset all of the customised settings in the
MENU to the factory defaults.
If the z ENTER button is pressed in the INITIALIZE ALL
menu, INITIALIZE ALL will display. Select OK and
press the ENTER button, NOW INITIALIZING... is
displayed. Then, POWER OFF is displayed.
Select OK and turn off the power according to the
instruction. (All other buttons are deactivated.)
The z INITIAL SETTING menu screen will display
when the power is connected.
( Æ page 11)
Remarks
The usage time of the projector, lamp runtime and z
the NETWORK settings are not initialised.
When z PASSWORD in SECURITY menu is
activated, be sure to enter the correct password
when initialised.
After z INITIALIZE ALL operation is completed, the
password is reset to the factory default setting and
PASSWORD setting is turned OFF.