Settings, Menu navigation, Navigating through the menu – Panasonic TQBJ0302 Manuel d'utilisation

Page 27: Nglish - 27, Operating procedure, Resetting to the factory default, Press button, Press the menu button. 1 ), Press the enter button. 3 )

Advertising
background image

Menu Navigation

Settings

E

NGLISH - 27

Menu Navigation

Navigating through the MENU

Operating procedure

J

Press the MENU button.

1 )

The main menu is displayed.

PICTURE

POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK

PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DAYLIGHT VIEW
STILL MODE
NOISE REDUCTION
TV-SYSTEM

STANDARD

DEFAULT

AUTO

OFF
OFF

AUTO

SELECT

ENTER

RETURN

Press ▲▼ to scroll to the required

2 )

main menu item and press the ENTER

button to select.

Select the required menu item from the

PICTURE, POSITION, LANGUAGE, DISPLAY

OPTION, PROJECTOR SETUP, SECURITY

and

NETWORK *

1

menu. The selected item is

highlighted in orange and displays the sub-menu

on the right.

PICTURE

POSITION

LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK

KEYSTONE
SHIFT
OVER SCAN
ASPECT

SELECT

ENTER

RETURN

Press the ENTER button.

3 )

You can select a sub-menu item.

PICTURE

POSITION

LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK

KEYSTONE

SHIFT
OVER SCAN
ASPECT

SELECT

ENTER

RETURN

Press ▲▼ buttons to scroll to the

4 )

required sub-menu item and press ◄►

buttons or the ENTER button to adjust.

The selected item is called up and the other menu

items disappear from the screen.

KEYSTONE

If there is a lower level, the next level will be

displayed.
PT-LB90NTU only

*1:

Remarks

Press the

z

MENU or RETURN button to return to the

previous menu. Press repeatedly to escape from

the menu mode and return to the projection.

Some items and functions may not be adjusted or

z

available, depending on the selected input signals.

Some settings are adjustable without any signals.

z

Called up item will disappear after 5 seconds

z

without any operation and return to the menu mode.

For the sub-menu items, see “Sub-menu” in the

z

“ON-SCREEN MENU”. (

Æ

page 28)

Resetting to the factory default

J

settings.

You can reset most of the customised settings to the

factory defaults by pressing the

DEFAULT button of

the remote control.

Press

button.

The operation depends on the screen displayed

currently.

While the sub-menu screen is displayed:

Q

The items of the sub-menu displayed currently are

reset to the factory default settings.

While the called up item screen is displayed:

Q

Only the item adjusted currently is reset to the fac-

tory default setting.

KEYSTONE

Remarks

You cannot reset all the settings at a time to the

z

factory default settings.

To reset all the settings to the factory defaults, see

“INITIALIZE ALL” in the “PROJECTOR SETUP

menu”. (

Æ

page 42)

Some menu items are not available to reset by

z

pressing the

DEFAULT button. Adjust each menu

item manually.

The triangle mark under the bar indicates factory

z

default setting and the square indicates the current

setting.

The triangle mark position varies by the selected

input signals.

Default setting

Current setting

Advertising