Remote control, About your projector, Nglish – Panasonic TQBJ0302 Manuel d'utilisation

Page 14: Top view, Front view, Preparation

Advertising
background image

About Your Projector

Preparation

14 -

E

NGLISH

Remote control

J

Top view

Remote control

signal emitters

Front view

J

POWER button

Switch between stand-by

mode and projection mode.

(

Æ

page 21, 22)

Switch the required input signal button to

select.

(The

NETWORK button is only for PT-LB90NTU)

(See CD-ROM contents.)

(

Æ

page 24)

Display the main menu.

(

Æ

page 28)

Navigate through the menus with the

▲▼◄►buttons, and activate the menu

item with

ENTER button.

(

Æ

page 27)

Capture the projected image as a frozen

picture.

(

Æ

page 24)

Reset some of the settings to the

factory default settings.

(

Æ

page 25)

The

MULTI-LIVE button is only for

PT-LB90NTU.

(See CD-ROM contents.)

Control to change the scale by

means of digital zoom.

(

Æ

page 26)

Detect the input signal and the

setting of

SHIFT, DOT CLOCK

and

CLOCK PHASE in POSITION

menu will be adjusted automati-

cally for

COMPUTER signals.

(

Æ

page 25)

The

PAGE buttons are only for

PT-LB90NTU.

(See CD-ROM contents.)

Turn off the projection temporarily.

(

Æ

page 24)

Display the frozen image while

the display of subsequent images

continues.

(

Æ

page 25)

The

COMPUTER SEARCH button

is only for PT-LB90NTU.

(See CD-ROM contents.)

Assign a useful function for a

shortcut.

(

Æ

page 26, 41)

Control to adjust the volume of the

speaker.

(

Æ

page 25)

Note

Do not drop the remote control.

z

Avoid contact with liquids or moisture.

z

Do not attempt to modify or disassemble the remote control.

z

Do not mix old and new batteries or batteries of different types.

z

Use only manganese batteries or alkaline batteries with the remote control.

Do not swing the strapped remote control.

z

Remarks

z

Do not let strong light shine onto the signal receptor.

The remote control may malfunction under strong light such as fluorescent.

z

You can operate the projector with the remote control within the remote range of 15 m (49'2"), approximately

±30 ° vertically and horizontally.

If there are any obstacles between the remote control emitter and the remote control signal receptor, the remote

z

control may not operate correctly.

The operating range may differ due to the screen material, and this function may not be effective with a translu-

cent screen.

Battery compartment

Press the tab and lift up the cover. Insert the batteries according to the

polarity diagram indicated inside.

Attaching a hand strap

You can attach a favourite

strap onto the remote control.

Advertising