Control of the device control terminals, Double-drive-thru connections, Control of the device control ter- minals – Panasonic WX-T3020 Manuel d'utilisation

Page 11

Advertising
background image

11

Control of the device control ter-

minals

The device control terminals of the center module can be
controlled through the Order Taker.

1. Hold down the C button. A short beep is heard from the

speaker of the headset and a connection will be made
toward the device control terminals of the center mod-
ule.

2. Release the C button. A short beep is heard twice from

the speaker of the headset and the connection will be
disconnected toward the device control terminals of the
center module.

Double-Drive-Thru connections

When Double-Drive-Thru connections are made with the
center module, any Order Taker is required to select the
center module of either Lane A or Lane B.

<For Normal setup>

1. When a connection is made to Lane A, the lane indicator

is lit in yellow. Press the T2 button if you want to make a
connection changeover to Lane B. When connected to
Lane B, a voice of [Lane B] is heard from the speaker of
the headset and the lane indicator is lit in green.

2. While a connection is maintained to Lane B, the lane

indicator is lit in green. Press the T2 button if you want to
make a connection changeover to Lane A. When con-
nected to Lane A, a voice of [Lane A] is heard from the
speaker of the headset and the lane indicator is lit in yel-
low.

<For Direct Lane Select setup>

1. While a connection is maintained to Lane A, the lane

indicator is lit in yellow. Press the T2 button if you want
to make a connection changeover to Lane B. When con-
nected to Lane B, a voice of [Lane B] is heard from the
speaker of the headset and the lane indicator is lit in
green.

2. While a connection is maintained to Lane B, the lane

indicator is lit in green. Press the T1 button if you want to
make a connection changeover to Lane A. When con-
nected to Lane A, a voice of [Lane A] is heard from the
speaker of the headset and the lane indicator is lit in yel-
low.

Note: When Direct Lane Select is set, TALK is available by

selecting either lane pressing T1 or T2 button.

Hold down

Release

Press

Press

Press

Press

Advertising