Panasonic K10059 - Manuel (Page 30)

Security Codes & Authority Levels
30
Access Group
You can assign users to a group (1 to 8) and select the access group for “Schedule”
mode.
Refer to “Access group” on page 31 in the 3000EN Security Systems User’s Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.
1 Press [ADT].
2 Scroll to “OTHER FUNCTIONS” by pressing [d]
or [B], then press [g].
3 Scroll to “USER CODES” by pressing [d] or [B],
then press [g].
4 Scroll to “ACCESS GROUP” by pressing [d] or
[B], then press [g].
5 Enter your security code.
6 Enter the user number of 2 digits, then press
[g] (ENTER).
(Ex. To select user number 8, enter “08”.)
7 Enter the access group number (1 to 8).
(Ex. To assign group number 1, press [1].)
8 Press [g] (ENTER).
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved. If
the system is wrongly armed, disarm the system,
and try again.
READY
Base Unit
OTHER FUNCTIONS
g
USER CODES
g
ACCESS GROUP
g
ENTER CODE
----
Enter User #
-,-
Enter User #
0,8
=ENTER READY g
Example
Access Grp (1-8)
-
Access Grp (1-8)
1
=ENTER READY g
Example
SecurityPhone.book 30 ページ ２００４年７月２１日 水曜日 午後６時５８分