Panasonic DMW-MCTZ3 Manuel d'utilisation

Page 17

Advertising
background image

17

VQT1F25

Notes

Check one more time that the O-ring is fitted evenly into the O-ring groove.

Avoid opening or closing the Case where there is a lot of sand or dust and in humid
or wet places.

If there is a sudden change in temperature, condensation may appear inside the
Case.

If sunscreen or sun oil sticks to the Case, wash it off immediately with lukewarm
water to prevent reduced waterproofness or discoloration.

Attaching the weights
About using the weights

Attach the weights to adjust to the preferred buoyancy when using the marine case.
Use them as necessary.

Refer to the following about buoyancy underwater.

1

If you use the digital camera and the marine case only:
They will float slowly in fresh water or seawater. (Plus buoyancy)

2

If you use the digital camera, the marine case and 1 weight:
They will float even more slowly in fresh water or seawater than

1

.

(Plus buoyancy)

3

If you use the digital camera, the marine case and 2 weights:
They will sink slowly in fresh water or seawater. (Minus buoyancy)

How to attach the weights

If you use 1 weight, align the protruding part of
the weight with the tripod receptacle on the
marine case and then use the supplied screw
to attach it. If you use 2 weights, align the
projecting part of the second weight with the
indented part of the first weight so that the
weights do not overlap and then attach them
to the tripod receptacle.

Note

To prevent rusting, detach the weights after use, wipe off any salt and then store
them.

DMW-MCTZ3.book 17 ページ 2007年2月6日 火曜日 午後1時21分

Advertising