Panasonic DMW-MCTZ3 Manuel d'utilisation

Page 13

Advertising
background image

13

VQT1F25

7

Inspect the O-ring one last time.

Check the following one more time:

There is no dirt sticking to the O-ring.

The O-ring has not come out.

The O-ring is not twisted.

There are no scratches or squashed parts on the O-ring.

Thoroughly wipe any grease off your hands with a dry cloth and then
wash your hands with water.

8

Close the buckle.

Check that no foreign materials are sticking to the outer surface of the O-ring and
the buckle on the front case and then close the Case.

Notes

To keep the Case completely airtight, do not scratch the surface of the O-ring that
comes into contact with the sides of the Case.

Never use an O-ring that has been scratched or damaged by dirt etc. This will cause
water leakage.

Each time you use the Case, remove the O-ring and check that there is no dirt,
sand, hair or other foreign materials in the O-ring groove and then apply a thin coat
of grease (supplied). If you apply too much grease, dirt and the dust may stick to the
O-ring causing water leakage.

Be sure to bring a spare O-ring in case the O-ring that you are using becomes
damaged or scratched.

1

2

DMW-MCTZ3.book 13 ページ 2007年2月6日 火曜日 午後1時21分

Advertising