Panasonic DP-3010 - Manuel (Page 190)

Customizing Your Machine
190
Fax Parameter Table
* = Factory default setting
No. Parameter Setting Comments
001 Contrast 1 (Lightest) Setting the home position for the CONTRAST.
----
*4 (Normal)
----
7 (Darkest)
002 Resolution Standard Setting the home position for the RESOLUTION.
*Fine
S-Fine
003 Original *Text Setting the home position for the ORIGINAL.
Text/Photo
Photo
004 Stamp *Off Setting the home position for the STAMP.
To select the stamp function when document is stored in memory, see
Fax Parameter No. 28.
On
005 Memory Off Setting the home position for the MEMORY.
*On
006 Dialing Method Pulse Selecting the dialing method.
*Tone
007 Header Print *Inside Selecting the printing position of the header.
Inside
: Inside TX copy area.
Outside : Outside TX copy area.
No Print : Header is not printed.
Outside
No Print
008 Header Format *Logo, ID
No.
Selecting the header format.
From To
009 RCV'D Time Print *Invalid Selecting whether the machine prints the received date & time, remote
ID, percentage of reduction and page number on the bottom of each
received document.
Valid
012 Comm. Journal Off Selecting the home position of printout mode for COMM. Journal Off/
Always/Inc. only.
Off
: Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
Always
*Inc. only
013 Auto Journal Print Invalid Selecting whether the machine prints the journal automatically after
every 200 transactions.
*Valid
014 File Acceptance Report *Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
memory communication.
Valid