Troubleshooting, Information codes – Panasonic DP-3010 Manuel d'utilisation

Page 210

Advertising
background image

Troubleshooting

210

Information Codes

456

• Unit received a confidential document or was

requested to be polled of a confidential document
under any of following conditions.
1.Not enough space in memory to receive the

confidential document.

2.Confidential Mailbox is full.
3.While printing received document.

• Unit was requested to relay a document.

1. Print a File List and check the contents.
2. Wait until unit finishes printing.

99

492/493/

494

Communication error occurred while receiving.

Check with the other party.

--

495

Telephone line disconnected.

Check with the other party.

--

501/502/

504

Communication error occurred using the internal V.34
Modem.

Check with the other party.

--

540/541/

542/

543/544

Communication error occurred while transmitting.

1. Reload the document and send again.
2. Check with the other party.

--

550

Telephone line disconnected.

Check with the other party.

--

552/553/

554/555

Communication error occurred while receiving.

Check with the other party.

--

580

Sub-address transmission to a unit that has no Sub-
address function.

Check the remote station.

66

581

Sub-address Password transmission to a unit that has
no Password Sub-address function.

Check the remote station.

66

630

Redial was not successful due to a busy line.

Reload the document and send again.

--

631

During dialing, STOP was pressed.

Reload the document and send again.

--

634

Redial was not successful due to no response from
the called station or wrong number dialed.

Note: If busy tone was not detected, the machine will

only redial once.

Check the telephone number and send again.

--

638

Power failure occurred during the communication.

Check the power cord and plug.

--

711

Incorrect LDAP settings.

Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.

122

712

Incorrect email address.

Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.

--

714

Cannot Log on to the LAN.

Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.

--

715

TCP/IP connection timed out.

Check the Internet Fax parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.

--

716

Cannot logon to the designated SMTP Server.

Check the SMTP Server IP Address setting.
Contact the Network Administrator.

--

717

Incomplete SMTP Protocol transmission. SMTP
Server’s hard disk may be full.

SMTP Server is defective.
Contact the Network Administrator.

--

Info.

Code

Meaning

Possible Action

Page

Advertising
Ce manuel est liée aux produits suivants: