Security menu, Input password, Password change – Panasonic PT-LB51SU Manuel d'utilisation

Page 37: Text display, Text change, Text display text change, Nglish - 37, J entering the security, Settings, Q after you change the password

Advertising
background image

E

NGLISH - 37

Settings

SECURITY menu

J Entering the SECURITY

Every time when you apply to the SECURITY
menu, you will be asked to perform the password
operation.

When you apply to the SECURITY menu before you
change the password to your original, perform to input
the following factory default password operation.

Press F H G I F H G I and ENTER.

Q After you change the password

When you apply to the SECURITY menu after you
change the password to your original in the
PASSWORD CHANGE

menu, input the original

password operation.

You can activate the security system and the password
operation will be asked to perform when the projecting
mode started. Unless you perform the correct password
operation, all of the button controls will be disabled
except the POWER button.

OFF

Deactive

ON

Active

You can change the password operation to your original.

1. Press a series of button operation up to 8 as a

password by using F G I and H buttons.

2. Press ENTER.
3. Press the exact same series of button operation

you entered in the NEW password box for
confirmation.

If a series of button operation is incorrect, you will be
asked to perform again.

4. Press ENTER.

You can set your original text, such as company name or
URL information, to display regularly at the bottom of the
projected image while projecting.

OFF

Deactive

ON

Active

You can enter your original text up to 22 characters for
TEXT DISPLAY

.

1. Use F G I H to specify the location of the

required character.

2. Press ENTER.

The selected character will be displayed in the TEXT
CHANGE

box.

3. Repeat until finish your original text.

If you select DELETE, you can delete a character is
selected with cursor. Then press ENTER.

4. Select OK and press ENTER to set the entered

text.

Select CANCEL or press MENU/RETURN buttons to
return to the previous menu.

NOTE:

• The factory default password is valid until you change

the password in PASSWORD CHANGE menu.

• The entered password operations will appear as

asterisks in the box.

INPUT PASSWORD

NOTE:

• When you activated the security system, make sure to

change the password to your original for safety.

• The factory default password is valid until you change

the password in PASSWORD CHANGE menu.

Remote control

Control panel

See “Navigating through the MENU” on page 27.

See “Main menu and Sub-menu” on page 28.

PICTURE

POSITION

INPUT PASSWORD

PASSWORD CHANGE

TEXT DISPLAY

TEXT CHANGE

PASSWORD

LANGUAGE

OPTION

SECURITY

WIRELESS

OFF

OFF

PASSWORD CHANGE

NOTE:

• The entered password operations will appear as

asterisks in the box.

TEXT DISPLAY

TEXT CHANGE

OK

CANCEL

DELETE

TEXT CHANGE

Advertising