Option1 settings, Color correction, Contrast mode – Panasonic PT-D4000U Manuel d'utilisation

Page 32: Auto signal, Back color, Startup logo

Advertising
background image

32

How to erase sub memory

Select sub memory number (1 to 8) corresponding
to sub memory to be erased using

buttons.

Press the DEFAULT button.

Read the confirmation message and select.

How to select sub memory

Select sub memory number (1 to 8) using the

buttons. Select “–” if you do not wish to

use the sub memory.

Press the ENTER button.

• You cannot select sub memory of a

different signal system.

Note

Registering in sub memory

Select the sub memory number to be registered
using the

buttons.

Press the ENTER button.

• Sub memories range from 1 to 8.

Note

COLOR CORRECTION

OFF

: This is the standard setting.

USER : The six colors of red, green, blue, cyan,

magenta and yellow can be adjusted
and registered for each of four signal
systems: Video, S-Video, RGB and
YP

B

P

R

.

Press the ENTER button to make the
detailed settings.

RETURN

STORE

SUB MEMORY LIST

- : RGB1-XGA60
1: RGB1-XGA60
2: VIDEO-NTSC

3:

4:
5:
6:
7:
8:

SELECT

CONTRAST MODE

There are two modes for adjusting to the operating
environment.

NORMAL : The brightness is set to maximum.
HIGH

: The contrast is set to maximum.

AUTO SIGNAL

The position where the screen is displayed can be
adjusted automatically without pressing the AUTO
SETUP button on the remote control each time
signals are input when signals are input frequently
such as when the projector is used at a conference.

ON

: Auto setup is performed automatically

when the video signals of the images
being projected have changed.

OFF

: The input auto setup function is set to

OFF.

BACK COLOR

You can set the colors of the screen when no signal
is input to the projector.

BLUE

: Set screen color to blue.

BLACK : Set screen color to black.
LOGO1 : The picture registered by the user will

be projected.

LOGO2 : The Panasonic logo is projected.

STARTUP LOGO

This sets the startup logo that is projected when the
power is turned on.

LOGO2 : This is the standard setting. The

Panasonic logo is projected.

NONE : “STARTUP LOGO” is disabled.
LOGO1 : The picture registered by the user will

be projected.

SUB MEMORY LIST

Multiple sets of image adjustment data (PICTURE,
POSITION, ADVANCED MENU adjustment values)
for the same kind of signal can be registered.

COLOR CORRECTION

R

RGB

G
B
Cy
Mg
Ye

ADJUST

MENU SELECT

0

0

0
0
0
0

The current signal system is displayed.

• Separate software is required in order

to create the pictures to use for
“LOGO1”. Consult your dealer.

Note

OPTION1 settings

OPTION1

COLOR CORRECTION

CONTRAST MODE
AUTO SIGNAL
BACK COLOR
STARTUP LOGO
SUB MEMORY LIST
DVI EDID

CHANGE

MENU SELECT

USER

NORMAL

OFF

BLUE

OFF

EDID2:PC

DVI SIGNAL LEVEL

0-255:PC

FUNC1
OSD POSITION

1

OSD MEMORY

ON

Advertising