Connection, Setup precautions – Panasonic PT-D4000U Manuel d'utilisation

Page 20

Advertising
background image

20

Connection

Setup precautions

• Before connecting any of your video/audio equipment to the projector, carefully read the owners manual

supplied with the equipment once again.

• All cable connections should be made with the entire system devices, including the projector, first turned off.
• Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect

cables.

• Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake.

Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

• The projector only accepts composite-video, S-Video, analog-RGB (with TTL sync. level) and digital signal.
• Some PC models are not compatible with the PT-D4000U projector.
• When using long cables to connect various equipment to the projector, there is a possibility that the image will

not be output correctly unless a compensator is used.

• The pin assignments on the S-VIDEO IN terminal are

as follows:

• The pin assignments on the DVI-D input terminal

are as follows (interface with DVI-D output
terminal on PC):

• The pin assignments on the RGB2 input terminal are

as follows:

Viewed from mating side

Pin No. Signal

Ground (luminance)

Ground (color)

Luminance signal

Color signal

Pin

: Not used.

Pins -

, and :

Ground

Viewed from mating side

Signal

R/P

R

G/G · SYNC/Y

B/P

B

HD/SYNC

VD

Pin No.

Viewed from mating side

Pin No

.

Signal

T. M. D. S data 2–

T. M. D. S data 2+

T. M. D. S data 2

shield

DDC clock

DDC data

T. M. D. S data 1–

T. M. D. S data 1+

T. M. D. S data 1

shield

Signal

+5 V

Ground

Hot plug sense

T. M. D. S data 0–

T. M. D. S data 0+

T. M. D. S data 0

shield

T. M. D. S clock

shield

T. M. D. S clock+

T. M. D. S clock–

Pin No.

• The DVI-D input terminal supports single link only.
• EDID settings may be needed depending on the DVI

equipment being connected. (page 33)

• The DVI-D input terminal can be used to connect to a

DVI equipment, but note that images may not appear
or the projector may not work properly when
connected to certain DVI equipment.

• This projector supports HDCP.

Advertising