Panasonic DP-1810F - Manuel (Page 86)

86
Access Code
The Access Code prevents an unauthorized user from operating the Fax functions of the machine.
Once a 4-digit Access Code is registered, no one can operate the machine without entering the correct
access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Access Code does not affect the use of the machine in any other way.
NOTE
1. To erase the Access Code, enter the Access Code and press and follow the
procedure above to Step 3, then press and .
General Description
Setting the Access Code
1
SET MODE (1-4)
ENTER NO. OR
∨ ∧
2
FAX PARAMETER(1-99)
NO.=
❚
3
38 ACCESS CODE
❚❚❚❚
4
Enter a 4-digit Access Code.
Ex:
38 ACCESS CODE
1234
5
38 ACCESS CODE
1:ALL 1234
6
Select Restriction Level.
for All operations
or
for Setting and Printing the Fax Parameters only.
Ex:
38 ACCESS CODE
2:FAX PARA. 1234
7
1 2 3 4
.
2
START
CLEAR SET STOP