Sending documents – Panasonic DP-1810F Manuel d'utilisation

Page 38

Advertising
background image

Sending Documents

38

Memory Transmission

2. If memory overflow occurs while storing documents, your machine operation will be stopped at

the time and the current and remaining document on the ADF will be left. The machine will
show "OUT OF MEMORY" on the display and prompt you whether to transmit the successfully
stored documents or to cancel the transmission. Press

to cancel or press

to transmit.

OUT OF MEMORY

INFO. CODE=870

If Fax Parameter No. 082 (Quick Memory XMT) is set to "Invalid", the machine stores all the
documents into memory first before transmitting.
After storing each document, the machine checks the available memory to prevent memory
overflow and stops storing additional document(s) if the stored data approaches a certain
percentage* (around 80%).

15 PAGES COMPLETED

DELETE? 1:YES 2:NO

Then the machine dials and sends the memory stored documents first and continues the
transmission of the remaining document(s) from the ADF during the same phone call.
If transmitting to multiple stations or if memory overflows while storing a document, the
machine prompts you whether to transmit the successfully stored documents or to cancel the
transmission. Press

to cancel or press

to transmit.

See the Specifications on page 144 for the image memory capacity.
If no action is taken within 10 seconds, the machine will start transmitting the stored
documents.
* The percentage varies and its dependent on the type of documents you are storing, machine
settings or whether an optional memory card is installed.

3. An Information Code will be displayed if the transmission has failed or no answer at the

receiving side after the last automatic redial.

INCOMPLETE

INFO. CODE=XXX

The document stored for this transmission will be erased from the memory automatically and
the information code is printed for the transmission on the Communication Journal (COMM.
JOURNAL).
If you need to retain the incomplete documents even after the last redial, change Fax
Parameter No. 031 (INC. FILE SAVE) to "Valid" in advance (See page 30). T
o retry the
incomplete documents, refer to page 91
.

4. To stop the transmission, press

.

The display shows:

COMMUNICATION STOP?

1:YES 2:NO

Press

to stop the transmission. The document you stored will be erased automatically.

If you do not want to erase the documents, change the setting of Fax Parameter No. 31 (INC.
FILE SAVE) to "Valid" in advance. (See page 30)
Then the following display will appear and you can select whether to save the file as an
incomplete file for editing and retry, or delete the file manually.

SAVE AS INCOMP.FILE?

1:YES 2:NO

5 If you would like to print a Communication Journal (COMM. JOURNAL) after stopping a

transmission, press

when the display shows:

PRINT COMM. JOURNAL?

1:YES 2:NO

1

2

1

2

STOP

1

1

Advertising