Panasonic WX-C3010 Manuel d'utilisation

Page 32

Advertising
background image

32

Symptom

Reference

pages

Cause/solution

You hear your echo in head-
set earpiece when you speak
into microphone of headset.

Outside speaker and microphone may not be properly installed.

• Be sure speaker and microphone are isolated from each

other, and tightly mounted with enough foam packed around
each of them to absorb vibrations.

Outbound and/or inbound audio level may be set too high.

• Set outbound audio level just high enough to be heard by

customers. Lower inbound audio to comfortable level.

Note:

Lower inbound audio setting may also prevent feedback

noise.

Echo canceller may be OFF or Effect level may be "LOW".

• Set echo canceller level properly.

Note:

Default setting is "MAX"(LED:RED))

27

You hear annoying noise of
vehicles outside.

DNR may be OFF or Effect level may be "LOW".

• Set DNR level properly.

Note:

Default setting is "MID"(LED:YELLOW))

27

The TALK indicator and PAGE
indicator are blinking after
startup, and communication
cannot be performed at all.

The Center Module may fail to start up.

• Turn off the power and on the power again.

9

The TALK indicator and PAGE
indicator are blinking after
startup, but communication
can be performed.

The Double-Drive-Thru function does not work properly. But, the
Single Lane operation works well.

• Check to see whether the power of the other Center Module is

set to ON.

• Check to see whether the Center Modules are correctly con-

nected.

• Check to see whether LANE A and LANE B are selected for

the lanes, respectively.

9, 24

Advertising