Roubleshooting guide, Problem possible cause solution – LG WM1333HW Manuel d'utilisation

Page 21

Advertising
background image

21

roubleshooting guide

Problem

Possible Cause

Solution

• Water supply is not adequate in

area.

• Water supply taps are not

completely open.

• Water inlet hose is bent.
• The filter of the inlet hose clogged.

• Drain hose is bent

or clogged.

• The drain filter is clogged.

• Load is too small.
• Load is out of balance.
• The appliance has an imbalance

detection and correction system. If
individual heavy articles are loaded
(bath mat, bath robe, etc.) and the
imbalance is too great, after several
attempts to restart the spin cycle the
machine will stop and the error code
will be displayed.

• Is the door opened or not completely

closed?

• The water overfills due to the faulty

water valve.

• The water level sensor malfunction.

• Overload in motor.

Check another tap in the house.

Fully open tap.

Straighten hose.
Check the filter of the inlet hose.

Clean and straighten the
drain hose.
Clean the drain filter.

Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper

spinning.

Close the door completely.

If is not released, call for
service.

Unplug the power plug and call for
service.

Close the water tap.
Unplug the power plug.
Call for service.

T

Advertising