Error displays/messages, 26 error displays/messages – Sony CDX-MP40 Manuel d'utilisation

Page 26

Advertising
background image

26

Error displays/Messages

*1

When an error occurs during playback of a CD or
MD, the disc number of the CD or MD does not
appear in the display.

*2

The disc number of the disc causing the error
appears in the display.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna control lead (blue)

or accessory power supply lead (red) to the
power supply lead of a car’s antenna booster.
(Only when your car has built-in FM/AM
antenna in the rear/side glass.)

• Check the connection of the car antenna.
• The auto antenna will not go up.

t Check the connection of the power

antenna control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to off (page 21).

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

t Set the local seek mode to “OFF” (page

15).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set the monaural reception mode to

“ON” (page 16).

A programme broadcast in stereo is heard
in monaural.

The unit is in monaural reception mode.
t Cancel monaural reception mode (page

16).

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about
5 seconds, and an alarm sound will be heard.

BLANK

*

1

No tracks have been recorded on an MD.*

2

t Play an MD with recorded tracks on it.

ERROR

*

1

• A CD is dirty or inserted upside down.*

2

t Clean or insert the CD correctly.

• An MD does not playback because of some

problem.*

2

t Insert another MD.

• A CD/MD cannot play because of some

problem.
t Insert another CD/MD.

HI TEMP

The ambient temperature is more than 50°C
(122°F).
t Wait until the temperature goes down

below 50°C (122°F).

NO DISC

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO MAG

The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.

NO MUSIC

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

NOT READY

The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.

RESET

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

Advertising