Connecting a satellite receiver with a vcr – Sony KP-51WS500 Manuel d'utilisation

Page 24

Advertising
background image

Installing and Connecting the Projection TV

24

Model name1[KP-51WS500] Model name2[KP-57WS500] Model name3[KP-65WS500]

[4-088-847-11 (1)]

Connecting a Satellite Receiver with a VCR

Disconnect all power sources before making any connections.

1

Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.

2

Connect the CATV cable to the VCR’s VHF/UHF IN jack.

3

Using a coaxial cable, connect the VCR’s OUT jack to the projection
TV’s VHF/UHF jack.

4

Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO
IN jacks.

5

Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

Coaxial

cable

Rear of projection TV

S VIDEO

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

Satellite receiver

VCR

YC-15V/30V
(not supplied)

VMC-810S/
820S (not
supplied)

YC-15V/30V (not supplied)

VMC-810S/820S
(not supplied)

Satellite
antenna
cable

Cable

Be sure your VCR’s video input is set correctly. Consult your VCR’s
operating manual for instructions.

Use TV/VIDEO to select
- VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned
on).
- VHF/UHF to watch cable TV.

If your VCR or satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.

01COV.book Page 24 Tuesday, April 2, 2002 12:22 PM

Advertising
Ce manuel est liée aux produits suivants: