Sony UNA-PSTN - Manuel (Page 12)

12-GB
Setting up the unit (continued)
(5) Close the cover.
The setting is completed.
Notes
• If the TONE/P1 (PULSE10)/P2 (PULSE20) selector is not set to the
appropriate position, you cannot communicate with the camcorder.
• If you cannot check the dial speed of your pulse dialing phone, set the
TONE/P1 (PULSE10)/P2 (PULSE20) selector to P1 (PULSE10).
• In some countries and areas, TONE/P1 (PULSE10)/P2 (PULSE20) setting
is not required.
In such a country or area, the USB-PSTN modem adaptor communicates
by the telecom protocol in that country or area, regardless of the TONE/
P1 (PULSE10)/P2 (PULSE20) setting.
To check the dial speed of a pulse dialing phone
You can change the dialing speeds of some pulse dial phones. To check the
dial speed, switch the dial speed selector on the phone and check the
clicking sound. The slower one is the normal setting. When you select the
fast dial speed, set the TONE/P1 (PULSE10)/P2 (PULSE20) selector to P2
(PULSE20).