Sony SPP-ID971 - Manuel (Page 18)

Basics 18 US
Note
If another call comes in by “call waiting” service while conversing with an
outside caller, you will hear two short beeps.
Tip
To inform you of an incoming call, the display shows “** RINGING **” when
ringing.
If you have subscribed to the Caller ID service;
• the caller’s number and/or name appears on the display when you receive a
call (see page 27) or when another call comes in by “call waiting” service.
• the ringer sound changes to a higher tone if the call matches the number
stored in the Phone Directory (memory match function; see page 27).
To
Adjust the handset volume
Switch to another call
(“call waiting” service*)
Turn on/off the ringer of
the handset
* You need to subscribe to the service from your telephone company.
1
When you hear the phone ring, pick
up the handset from the base unit, and
press (TALK).
“TALK” appears on the display and
the display also shows the operation
duration in hours, minutes and
seconds.
The dialing keys light up for five
seconds.
The LINE lamp on the base unit lights
up.
2
When you’re done talking, press
(OFF) or replace the handset on the
base unit.
The display and the LINE lamp on the
base unit go off.
Receiving calls
Additional tasks
VOL switch
(CALL WAITING/FLASH)
Do this
Set the VOL switch to H (high), M (middle) or L
(low).
Press (CALL WAITING/ FLASH).
Press (CALL WAITING/ FLASH) again to return to
the first caller.
See “Turning off the ringer of the handset” on
page 25.