Sony AVD-C70ES - Manuel (Page 54)

54 US
Displaying the audio information of
the disc
When you select “AUDIO,” the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number
of recorded channels may differ.
* “PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
For “DOLBY DIGITAL,” the channels in
the playing track are displayed numerically
as follows:
For Dolby Digital 5.1 ch:
Current audio format *
Rear component 2
LFE (Low Frequency
Effect) component 1 Front component 2 +
Center component 1
• Dolby Digital 5.1ch
• DTS
Notes
• When the signal contains rear signal components
such as LS, RS, or S, the surround effect is
enhanced.
• If you play MPEG AUDIO sound tracks, the
receiver outputs PCM (stereo) signals.
DOLBY DIGITAL 3 / 2 . 1
PCM 48kHz 24bit
PROGRAM FORMAT
DOLBY SURROUND
DOLBY DIGITAL 2/0
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
1:DVD
1 2 ( 2 7 ) MAKING SCENE
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
DVD
1: ENGLISH
DTS 3/2.1
PROGRAM FORMAT
The display examples are as follows:
• PCM (stereo)
• Dolby Surround
To select the audio mode by using
the remote’s display
Press </> until “<PLAYER>” appears in the
remote’s display, and move the cursor (
c) to
“AUDIO” by using the Scroll key, then press
the Scroll key. Each time you press the
Scroll key, the audio mode changes.
Notes
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
automatically.