Sony DSR-50 - Manuel (Page 57)

Chapter 4 Setting the Time Code and Adjusting the Video Signals
Chapter 4 Setting the Time Code and Adjusting the Video Signals
57
(GB)
Chapter 4 Setting the
Time Code and Adjusting the
Video Signals
1
Set the DISPLAY (LCD OFF/OFF/ON) selector to
ON, and the DISPLAY (MENU/TC/AUDIO)
selector to MENU.
The LCD monitor displays the menu. If you turn
the SUPERIMPOSE switch on, the menu is also
displayed on the VIDEO OUT1 output.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
TC
CM
DISP
V
A
LCD
VTR
ETC
(The TC FORMAT submenu is only for DSR-50.)
2
Rotate the SEL/PUSH EXEC dial to select TC/UB
SET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN 00:00:00:00 TC
CM
DISP
V
A
LCD
VTR
ETC
3
Rotate the SEL/PUSH EXEC dial to select TC
PRESET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN 00:00:00:00
RESET
PRESET
RETURN
TC
CM
DISP
V
A
LCD
VTR
ETC
4
Rotate the SEL/PUSH EXEC dial to select
PRESET, then press the dial.
The following menu appears.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN O O O O
00:00:00:00
o o o o
SET
CANCEL
TC
CM
DISP
V
A
LCD
VTR
ETC
5
Set the first two digits. Rotate the SEL/PUSH
EXEC dial to select the number, then press the
dial.
6
Repeat step 5 to set the other digits.
7
Rotate the SEL/PUSH EXEC dial to select SET,
then press the dial.
The initial time code value is set and the menu
display returns to step
2 .
8
Rotate the SEL/PUSH EXEC dial to select
RETURN, then press the dial.
The menu display returns to step 1 .
To cancel the time code setting
Select CANCEL in step 7 , then press the SEL/PUSH
EXEC dial.
To reset the time code
Select RESET in step 4 , then press the SEL/PUSH
EXEC dial.
To set the value of the user bits
You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code track.
Notes
• The user bits can be set only in a DVCAM format
recording. It cannot be set in a DV format recording.
• Before setting the user bits, set the TC/UB IN on the
TC/UB SET menu to INTERNAL and UB TIME to
OFF.
For details on TC/UB IN and UB TIME, see “TC/UB SET
menu” on page 78 (GB).