Sony DSR-50 Manuel d'utilisation

Page 50

Advertising
background image

Recording

Chapter 3 Playback and Recording

50

(GB)

Chapter 3

Playback and Recording

6

Select the audio input level adjustment mode in the AUDIO SELECT
switches.

Note

You cannot adjust the recording level if you record signals input from
the DV IN/OUT connector.

7

If necessary, adjust the audio input level by turning the audio recording
level control knobs.

You can adjust the recording level with the audio recording level
control knobs if you have selected MANU in step

6

. While looking at

the audio level meters on the LCD monitor or the display window, turn
the audio recording level control knobs and adjust the recording level.
Adjust the audio recording level so that the recording level does not
exceed 0 dB when the audio signal is at its maximum. If the recording
level exceeds 0 dB, the OVER indicators light.

Recording Procedure

1

After checking that the REC/SAVE switch of the cassette is set to the
write enabled position and checking the tape for slack, hold the
cassette so that the tape window is facing upward, then insert it into
this unit.

The cassette is automatically loaded into the unit and the tape will stop.

For details of the REC/SAVE switch and checking the tape for slack, see
“Notes on Video Cassettes” on page 40 (GB).

1

2

3

Advertising
Ce manuel est liée aux produits suivants:

50P