Sony DSR-50 Manuel d'utilisation

Page 21

Advertising
background image

Chapter 1

Overview

21

(GB)

Chapter 1 Overview

The audio screen shows the following symbols
depending on the menu settings, etc.

:Audio dubbing symbol

This symbol appears with a channel on which you
can dub sound. You can select a channel to dub
the sound in the AUDIO DUB on the AUDIO
SET menu.
This symbol appears during playback of a tape
recorded in 32 kHz of the DVCAM format.
This symbol also appears during audio dubbing on
a tape recorded in 32 kHz of the DVCAM format.
This symbol does not appear when the INPUT
SELECT selector is set to DV.

:Wind noise reduction symbol

This symbol appears with a channel in which the
WIND on the AUDIO SET menu has been set to
ON.

:Link symbol

If the AGC (Auto Gain Control) of a pair of
channels is linked, this symbol is placed between
the channels.
If AGC CH1, 2 on the AUDIO SET menu have
been set to LINKED and channels 1 and 2 in the
AUDIO SELECT switch have been set to AUTO,
channels 1 and 2 can be linked for AGC operation
and for stereo sound where channel 1 is set for the
left sound and channel 2 is set for the right sound.
If AGC CH3, 4 on the AUDIO SET menu have
been set to LINKED and channels 3 and 4 in the
AUDIO SELECT switch have been set to AUTO,
channels 3 and 4 can be linked for AGC operation
and for stereo sound where channel 3 is set for the
left sound and channel 4 is set for the right sound.

Note

This symbol does not appear when inputting signals
from the DV IN/OUT connector.

:Camera symbol

This symbol appears at the right side of the LVL
display when the INPUT SELECT selector is set
to other than DV and the audio input selector is set
to CAM.

Advertising
Ce manuel est liée aux produits suivants:

50P