Sony UP-2100 Manuel d'utilisation

Page 9

Advertising
background image

9

Operation

Note

Never put your hand into the ink ribbon compartment. The thermal head
becomes very hot. You may burn yourself if you touch it.

When the ink ribbon cartridge cannot be ejected

Turn the power off, then back on again. Then, after a while, press the ink ribbon
cartridge.
In this case, the image in memory will be lost.

3

Remove any slack from the ink ribbon.
If the ribbon is left slack, it may be damaged when inserted.

4

Insert the ink ribbon cartridge firmly until it stops.

When the ink ribbon cartridge cannot be inserted

Turn the power off, then back on gain. Then, insert the ink ribbon cartridge.

5

Close the front panel.

Wind the spool until
the not-used part
comes to the right end.

Advertising
Ce manuel est liée aux produits suivants: