Before printing, Loading an ink ribbon cartridge – Sony UP-2100 Manuel d'utilisation

Page 8

Advertising
background image

8

Operation

Operation

Before Printing

2

Remove the ink ribbon cartridge by pushing the ink ribbon cartridge itself.
The ink ribbon cartridge pops out.
When you use the printer first, this operation is not required.

This section describes the following operations that must be made prior to starting
printing after mounting the paper tray and paper cover on the printer and making
the necessary connections.
• Loading an ink ribbon cartridge (see below)
• Loading paper (see page 11)
• Selecting the input signal (see page 13)
Once the above operations have been completed, there should be no need to repeat
them during routine printing. Perform them only when absolutely necessary.

Loading an Ink Ribbon Cartridge

To make printouts, an ink ribbon cartridge and paper (which are compaticble) must
be loaded.
If the printer detects an incompatible combination, an error message appears.
Use the ink ribbon cartridge and print paper (supplied) to check if the video printer
functions properly.

Notes

• Use only ink ribbon cartridge and paper “UPC-2010 Color Printing Pack”, that

are designed for use with this printer. Failing to do so is likely to result in
unsatisfactory printing or malfunctions.

• When replacing the ink ribbon cartridge, do not turn off the power. Turning off

the power will cause the image stored in the memory to be lost.

1

Open the front panel by pulling the front panel top toward you.

Advertising
Ce manuel est liée aux produits suivants: