Sony UP-2100 - Manuel (Page 75)

75 Others
Specifications
Power requirements
120 V AC, 50/60 Hz
Power consumption
About 1.8 A max. at 25°C,
120 V AC
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20 % to 80 %
(no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20 % to 90 %
(no condensation allowed)
Dimensions About 370
Ч
125
Ч
417 mm (w/h/d)
(14 5 ⁄
8
Ч
5
Ч
16 3 ⁄
4
inches)
Mass About 14 kg (15 lb 14 oz)
Printing system
Sublimation heat transfer printing
Thermal head 6.1 dot/mm (512 dots)
Total gradation
256 levels each for yellow,
magenta, and cyan
Printing time Approximately 60 seconds
TV system NTSC/EIA standards
Input connectors
S VIDEO (Separate luminance (Y) and
chrominance (C) signals):
4-pin mini-DIN
×
1
Y: 1 Vp-p
C: 0.29 Vp-p color burst
75 ohms (terminated), sync
negative
VIDEO (NTSC composite video signal):
BNC connector
×
1
1 Vp-p, 75 ohms (terminated), sync
negative
AC IN (for power input)
Output connectors
S VIDEO (Separate luminance (Y) and
chrominance (C) signals):
4-pin mini-DIN
×
1
Y: 1 Vp-p
C: 0.29 Vp-p color burst
75 ohms (terminated), sync
negative
VIDEO (NTSC composite video signal):
BNC connector
×
1
1 Vp-p, 75 ohms (terminated), sync
negative
Controls connectors
REMOTE 1 : special mini jack
×
1
For RM-5500 Remote Control Unit
(not supplied)
REMOTE 2 (automatic printing connector):
Stereo mini jack :
×
1
For RM-91 Remote Control Unit or
FS-20/36 Foot Switch (not
supplied) (see “Selecting the
Operation Mode for Automatic
Printing Capabilities” page 65)
Supplied accessories
Color printing pack (1)
Paper tray (1)
Paper cover (1)
AC power cord (1)
Warranty card (1)
Operating Instructions (1)
Optional accessories
Color printing pack
UPC-2010
RM-5500 remote control unit
RM-91 remote control unit
FS-20 foot switch
FS-36 foot switch