Sony WAHT-SD1 - Manuel (Page 8)

8 GB
Before connecting the AC power cords (mains leads) of your Sony DVD Home Theatre System (DAV)
and the surround amplifier to a wall outlet (mains), connect the front and center speakers to your DAV,
and surround speakers to the surround amplifier.
After connecting the speakers, surround
amplifier, IR transmitter, IR receiver, and the
AC power cords (mains leads), adjust the
wireless system for good transmission.
1
Press "/1 on DAV and POWER on the
surround amplifier.
The DAV and surround amplifier turn on
and the POWER/ON LINE indicator turns
red.
2
Orient the IR transmitter and IR
receiver to face each other.
Adjust the position until the POWER/ON
LINE indicator turns green.
Tip
• The IR transmitter is movable for easy reorientation.
Note
• Make sure that there is no obstruction such as a
person or object between the IR transmitter and the IR
receiver. Otherwise, the sound from the surround
speakers may be interrupted.
• If the POWER/ON LINE indicator turns red, the
transmission is incomplete. Adjust the position of the
IR transmitter and IR receiver until the POWER/ON
LINE indicator turns green.
• If the POWER/ON LINE indicator flashes in red, the
IR receiver is receiving an infrared signal from
another Sony's wireless product. Move the IR
transmitter and/or the IR receiver so that the
POWER/ON LINE indicator turns green.
Connecting the AC Power Cords (Mains Leads)
Adjusting the Wireless System
"/1
POWER
POWER ON-LINE
POWER
POWER/ON LINE
Indicator