Samsung HL-T5655W - Manuel (Page 14)

English - 14
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable or
DVI-HDMI Adapter between the
HDMI 1/DVI IN jack on the TV and
the DVI jack on the DVD Player/
Set-Top Box.
2 Connect Audio Cables between the
DVI IN [L-AUDIO-R] jack on the TV
and the AUDIO OUT jacks on the
DVD Player/Set-Top Box.
➢ Each DVD Player/Set-Top box has a different panel configuration.
➢ When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.
➢ When using an HDMI/DVI cable connection, you must connect to the HDMI 1/DVI IN terminal on the TV.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
➢ Each Digital Audio System has a different panel configuration.
1 Connect an Optical Cable between
the DIGITAL AUDIO OUT (OPTICAL)
jack on the TV and the Digital Audio
Input jack on the Digital Audio
System.
When a Digital Audio System is
connected to the DIGITAL AUDIO
OUT (OPTICAL) terminal: Decrease
the gain (volume) of the TV, and
adjust the volume level with the
system’s volume control.
➢ 5.1CH audio is possible when the TV
is connected to an external device
supporting 5.1CH.
What is OPTICAL?
 Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital
audio in the form of a light wave that uses a glass conductor.
TV Rear Panel
DVD Player/Set-Top Box
Audio Cable(Not supplied) 2
HDMI/DVI Cable(Not supplied) 1
TV Rear Panel
Optical Cable (Not supplied) 1
Digital Audio System
BP68-00626E_Eng-1.indd 14 2007-04-13 ｿﾀﾈﾄ 2:06:22