Dc in 12v i/o 5 m, Dc in 12v i/o – Sony IPELA SNC-P5 Manuel d'utilisation

Page 2

Advertising
background image

130 (5

1

/

8

)

142 (5

5

/

8

)

106 (4

1

/

4

)

DC IN 12V

I/O

5

m

!

E

3-

1

3-

2

3-

2

4

F

3-

1

H

I

J

K

1

2

3

4

5

6

10BASE-T/100BASE-TX

Unit: mm (inches) / Unité: mm (pouces)

Installation

Notes

• When you attach the camera to a wall or ceiling, entrust the

installation to an experienced contractor or installer.

• Attach the camera to the wall or ceiling firmly after making sure

the wall or ceiling is strong enough to bear the weight of the
camera and the stand. If it is not strong enough, the camera may
fall and cause serious injury.

• Be sure to fix the supplied strap to a junction box, wall or ceiling

with a screw to prevent the camera from falling.

• Check periodically, at least once a year, to ensure that the

connection has not loosened. If conditions warrant, make this
periodic check more frequently.

• According to the installing position, illumination may be got into

an image. In this case, change the installing position.

Installing on a wall

E

To install the camera on a wall, use the supplied wall-mounting
bracket.

1

Fix the wall-mounting bracket to the wall with the supplied 2
tapping screws.

2

Connect the AC power adaptor and the LAN cable to the
camera.
See “Connecting Power and Network” for details of connection.

3

Install the camera on the wall.

1

Attach the camera as an illustration to the wall-mounting
bracket fixed on the wall.

2

Push the camera downward.

Notes

• When you install the camera on a wall using the wall mounting

bracket, take care not to trap the AC power cord or the LAN
cable between the camera and the wall.

• Secure the screws firmly so that they will not come loose.

Installing on a Ceiling

When installing the camera on a ceiling, use the supplied stand.

Note

Install it on an even place of the ceiling. If it is installed on a tilted
place, a tilting image is displayed during PanTilt action.

Mounting diagram

F

Use this diagram when you determine the positions and sizes of
the wiring hole and the mounting holes for the supplied stand.

Mounting screws

The supplied stand is provided with three mounting holes. Install
the stand to a ceiling or wall with screws through these holes. The
required mounting screws differ depending on the installation
location and its material.

Steel wall or ceiling: Use M4 bolts (not supplied) and nuts.
Wood wall or ceiling: Use the supplied tapping screws (4

×

20).

The panel thickness must be 15 mm (

5

/

8

inch) or more.

Concrete wall: Use appropriate anchors, bolts and plugs (not

supplied) for concrete walls.

Junction box: Use screws (not supplied) to match the holes on the

junction box.

Installing the supplied stand

G

1

Attach the supplied stand to the ceiling with a screw as the
illustration.

2

Put the AC adapter or LAN cable through the attached stand,
and connect it to the camera.

3

Fix the camera in the stand.

1

Join the screw of the stand to the screw hole on the rear of
the camera.
Fit carefully the convexity part of the stand together with the
concavity part of the camera as the illustration.

2

Tighten it by turning the knob on the rear of the stand.

4

Attach the cover of the stand as the illustration.

Tip

Before installing the stand to the ceiling, feed the wires extended
from the ceiling or wall through the opening on the rear of the
stand.

Installing on a Shelf or a Desk Top

H

When installing the camera on a wall, use the supplied stand.

Note

When you install the camera on a tall shelf, an injury or breakage
may result if only the rubber feet are attached to the rear of the
stand. The camera and the stand must be fixed to the shelf or
desktop with screws or similar.

Drop-prevention strap

I

When installing the camera, be sure to use the supplied drop-
prevention strap. First, feed the string through the hole on the rear
of the camera. Fix it with a screw (not supplied) to the junction box
or something of the wall or ceiling.

Connecting Power and Network

Note

When you connect the network cable, cables for the microphone
input connector and for the line output connectors, the cap of the
connectors section may not close. In this case, leave it open during
use because forcing the cap close may be a cause of a trouble.

Ethernet connection

J

Connect the

network port of this unit to the router or the hub

with a commercially available network cable (straight), and connect
the AC adapter to the DC IN 12V connector.

1

SNC-P5 (top)

2

Commercially available network cable (straight cable)

3

Sony MPA-AC1 AC power adaptor (supplied)
Use the supplied plug adapter to match to the configuration of
the outlet.

4

Power cord (supplied)

5

To a wall outlet

6

Router or Hub

7

Network

Using the I/O Port

K

Connecting the wire

While holding down the button on the slot to which you want to
connect the wire (AWG No. 28 to 22) with a small slotted
screwdriver, insert the wire into the slot. Then release the
screwdriver from the button.
Repeat this procedure to connect all required wires.

Wiring diagram for sensor input

Mechanical switch/open corrector output device

1

Camera inside

2

Outside

3

Pin 4 (Sensor input +)

4

Pin 3 (Sensor input –)

5

Ground

6

Mechanical switch or open collector output device

Wiring diagram for alarm output

1

Camera inside

2

Outside

3

Pin 2 (Alarm output +)

4

Magnet relay 24 V AC/24 V DC, 1A or less

5

Pin 1 (Alarm output –)

6

Circuit example

7

Ground

1

G

1

7

DC IN 12V

1

2

2.35 k

3.3V

3

4

6

5

5V

6

7

5

4

3

Tapping screw
Vis tarauduses

Tighten
firmly.
Serrer à
fond.

L

1

2

Specifications

Network

Protocol

TCP/IP, ARP, ICMP, HTTP, FTP (server/

client), SMTP (client), DHCP (client),
DNS (client), NTP (client), SNMP
(MIB-2), RTP/RTCP, PPPoE

Compression

Video compression format

MPEG4/JPEG (selectable)

Audio compression format

G.711, G.726 (40, 32, 24, 16 kbps)

Image size

640

×

480 (VGA), 480

Ч

360, 384

Ч

288,

320

Ч

240 (QVGA), 256

Ч

192, 160

Ч

120 (QQVGA)

Maximum frame rate

Max. 30 FPS (QVGA)

Web browser

Internet Explorer Ver. 5.5 or 6.0

(Available OS: Windows 2000/ XP)

Computer environments CPU: Pentium III, 1 GHz or higher

(Pentium 4, 2 GHz or higher
recommended)

RAM: 256 MB or more
Display size: 1024

×

768

Maximum user access

In JPEG mode: 20 users
In MPEG4 mode: 10 users

Network security

Password (basic authentication), IP

filtering

Homepage customization

Starting from a homepage in the built-in

flash memory or CF is possible.

Other functions

Motion detection, Cropping, Built-in clock,

etc.

Camera

Image device

1/4 inch color CCD

Effective picture elements

Approx. 330,000

Built-in lens

3

×

(Zoom ratio)

Focal length: f=3.4 to 10.2 mm
Maximum F number: F (WIDE marge) 2.8

to F (TELE marge) 3.9

View angle: 20° - 55.8° (horizontal), 15.1°

- 43.3° (vertical)

Shooting distance: WIDE marge 0.4 m,

TELE marge 1.4 m

Minimum illumination

3.5 lx (AGC ON, F2.8, 30IRE)

Horizontal resolution

400 TV (WIDE marge)

Video S/N

-48 dB

Shutter speed

1 to 1/10,000 s

Mechanism

Pan action

-60 ° to + 60 °

Maximum speed: 90 ° / s

Tilt action

-65 ° to +10 °

Maximum speed: 90 ° / s

Interface

Network port

10BASE-T/100BASE-TX (RJ-45)

I/O port

Sensor input :

×

2, make contact

Alarm output :

×

1, 24 V AC/DC max, 1 A

(mechanical relay outputs electrically

isolated from the camera)

Video output

Mini jack (1.0 Vp-p, 75 ohms,

unbalanced, sync negative)

*

Use an AV cable with AV 3-prong mini plug
or AV 4-prong mini plug.
A video cable with a monaural mini plug
cannot be used.

CF card slot

Supporting Type I/Type II

Built-in microphone

Electret condenser microphone (omni-

directional)

Mic input

Minijack (monaural)
Plug-in-power supported (rated voltage:

2.5 V DC)

Recommended load impedance

2.2 kohms

Line output

Minijack (monaural), Maximum output

level: 1 Vrms

Others

Power supply

12 V DC

Power consumption

6.2 W

Operating temperature

0 °C to +35 °C (32 °F to 95 °F)

Operating humidity

20 to 80 %

Storage temperature

-20 °C to +60 °C (-4 °F to +140 °F)

Storage humidity

20 to 95 %

Mass

Camera: Approx. 380 g (13.4 oz)
Stand: Approx. 360 g (12.7 oz)

Dimensions (

L

)

Camera: 130

Ч

130

Ч

110 mm (w/h/d)

(5

1

/

8

Ч

5

1

/

8

Ч

4

3

/

8

inches)

not including the projecting parts

Stand: 130

Ч

178

Ч

142 mm (w/h/d)

(5

1

/

8

Ч

7

1

/

8

Ч

5

5

/

8

inches)

Supplied accessories

AC power adaptor MPA-AC1 (Sony) (1), Power cord (1), Stand (1),
Wall-mounting bracket (1), Rubber foot (4), Drop-prevention strap
(1), Tapping screw (3), CD-ROM (User’s Guide and supplied
programs) (1), Installation manual (1)

Optional accessories

Wireless card

SNCA-CFW1

Wireless LAN antenna

SNCA-AN1

Memory stick Duo adapter corresponding to Compact
Flash

TM

slot

MSAC-MCF1

Memory stick Duo

MSX-M512S (512MB)

Design and specifications are subject to change without notice.

Regular parts replacement

Some of the parts that make up this product (electrolytic
condenser, for example) need replacing regularly depending on
their life expectancies.
The lives of parts differ according to the environment or
condition in which this product is used and the length of time it
is used, so we recommend regular checks.
Consult the dealer from whom you bought it for details.

1 2 3 4

5 6

I / O

1 2 3 4

5 6

I / O

SNC-P5

Stand/Socle

ø130 (5

1

/

8

)

110

(4

3

/

8

)

DC IN 12V

I/O

5

m

!

178

(7

1

/

8

)

113

(4

1

/

2

)

Unit: mm (inches) / Unité: mm (pouces)

Stand mounting holes / Orifices de montage du socle

Installation

Remarques

• Pour un montage de la caméra au mur ou au plafond, confiez

l’installation à un prestataire ou installateur expérimenté.

• Montez solidement la caméra au mur ou au plafond après vous être

assuré que celui-ci est suffisamment robuste pour supporter le poids
de la caméra et du socle. La caméra risquerait autrement de tomber
et de provoquer de graves blessures.

• Fixez impérativement la sangle fournie à une boîte de jonction, etc.

pour empêcher la caméra de tomber.

• Assurez-vous périodiquement (au moins une fois par an) que

l’accouplement n’est pas desserré. Si les conditions le permettent,
effectuez cette vérification périodique plus fréquemment.

• Selon la position d’installation, il se peut que l’éclairage apparaisse

sur l’image. Changez alors la position d’installation.

Installation au mur

E

Pour installer la caméra au mur, utilisez le support de montage
mural fourni.

1

Fixez le support de montage mural au mur avec les 4 vis taraudeuses
fournies.

2

Raccordez l’adaptateur secteur et le câble réseau local à la caméra.
Pour plus d’informations sur ce raccordement, voir « Raccordement à
l’alimentation et au réseau ».

3

Installez la caméra au mur.

1

Montez la caméra sur le support de montage mural fixé au mur
comme sur l’illustration.

2

Poussez la caméra vers le bas.

Remarques

• Lorsque vous installez la caméra au mur à l’aide du support de

montage mural, veillez à ne pas pincer le cordon d’alimentation
secteur ou le câble réseau local entre la caméra et le mur.

• Serrez ensuite les vis à fond de faÿon qu’elles ne se desserrent pas.

Installation au plafond

Lors de l’installation de la caméra au plafond, utilisez le socle
fourni.

Remarque

Installez la camera sur une partie horizontale du plafond. Si vous
l’installiez sur une partie inclinee, l’image apparaitrait inclinee lors
des operations PanTilt.

Schéma de montage

F

Utilisez ce schéma pour déterminer la position et la taille de l’orifice
de câblage et des orifices de montage du socle fourni.

Vis de montage

Le socle fourni comporte trois orifices de montage. Posez le socle
au plafond ou au mur en faisant passer des vis par ces orifices.
Les vis de montage requises diffèrent selon l’emplacement et le
matériau de la surface d’installation.

Mur ou plafond en acier : Utilisez des boulons M4 (non fournis) et

des écrous.

Mur ou plafond en bois : Utilisez les vis taraudeuses (4

×

20)

fournies. L’épaisseur de panneau doit être d’au moins 15 mm
(

5

/

8

pouce).

Mur en béton : Utilisez des ancrages, boulons et chevilles (non

fournis) pour mur en béton appropriés.

Boîte de jonction : Utilisez des vis (non fournies) adaptées aux

orifices de la boîte de jonction.

Installation du socle fourni

G

1

Montez le socle fourni au plafond avec une vis comme sur
l’illustration.

2

Faire passer l’adaptateur secteur ou le câble réseau à travers le
socle fixé et le raccorder à la caméra.

3

Fixez la caméra dans le socle.

1

Engagez la vis du socle dans l’orifice fileté à l’arrière de la
caméra.
Engagez soigneusement la partie convexe du socle avec la
partie concave de la camera comme sur l’illustration.

2

Serrez en tournant le bouton à l’arrière du socle.

4

Fixez le couvercle du socle comme sur l’illustration.

Conseil

Avant d’installer le socle au plafond, faites passer les fils du plafond ou
du mur par l’orifice à l’arrière du socle.

Installation sur une étagère ou une table

H

Lors de l’installation de la caméra au mur, utilisez le socle fourni.

Remarque

Lorsque la caméra est installée sur une étagère haute, elle risque de
blesser quelqu’un ou de se casser en tombant si elle n’est posée que
sur ses seuls pieds en caoutchouc situés à l’arrière du socle. Fixer la
caméra et le socle à l’étagère ou à la table avec des vis ou des
fixations similaires.

Sangle anti-chute

I

Lors de l’installation de la caméra, utilisez le câble anti-chute
fourni. Faites d’abord passer le câble par l’orifice à l’arrière de la
caméra. Fixez-le avec une vis (non fournie) à une boîte de jonction
ou à quelque chose sur le mur ou le plafond.

Raccordement à l’alimentation et au réseau

Remarque

Après le raccordement du câble réseau et des câbles pour le
connecteur d’entrée de micro et les connecteurs de sortie de ligne,
il se peut que le chapeau de la partie des connecteurs ne se ferme
pas. Dans ce cas, laissez-le ouvert pendant l’utilisation car en
forçant sa fermeture, vous pourriez provoquer des problèmes.

Connexion Ethernet

J

Raccordez le port réseau

de la caméra au routeur ou au

concentrateur (hub) à l’aide d’un câble réseau (droit) en vente dans
le commerce et raccordez l’adaptateur secteur au connecteur DC
IN 12V.

1

SNC-P5 (Dessus)

2

Câble réseau en vente dans le commerce (câble droit)

3

Adaptateur secteur MPA-AC1 (Sony) (fourni)
Utilisez la fiche adaptatrice fournie si la configuration de la prise
le rend nécessaire.

4

Cordon d’alimentation (fourni)

5

Vers prise murale

6

Routeur ou concentrateur (hub)

7

Réseau

Utilisation du port d’E/S

K

Connexion des fils

Insérez le fil tout en enfonÿant le bouton de la fente où vous
désirez connecter le fil (n° 28 à 22 AWG) avec un petit tournevis à
lame plate. Relâchez ensuite le tournevis du bouton.
Répétez cette opération pour connecter tous les fils nécessaires.

Schéma de câblage pour l’entrée de capteur

Contacteur mécanique/dispositif de sortie à collecteur ouvert

1

Intérieur de la caméra

2

Extérieur

3

Broche 4 (Entrée de capteur +)

4

Broche 3 (Entrée de capteur –)

5

Masse

6

Contacteur mécanique ou dispositif de sortie à collecteur ouvert

Schéma de câblage pour la sortie d’alarme

1

Intérieur de la caméra

2

Extérieur

3

Broche 2 (Sortie d’alarme +)

4

Relais magnétique 24 V CA/24 V CC, 1 A ou moins

5

Broche 1 (Sortie d’alarme –)

6

Exemple de circuit

7

Masse

Spécifications

Réseau

Protocole

TCP/IP, ARP, ICMP, HTTP, FTP

(serveur/client), SMTP (client),
DHCP (client), DNS (client), NTP
(client), SNMP (MIB-2), RTP/
RTCP, PPPoE

Compression

Format de compression vidéo

MPEG4/JPEG (sélectionnable)

Format de compression audio

G.711, G.726 (40, 32, 24 et 16 kbits/s)

Taille d’image

640

×

480 (VGA), 480

Ч

360,

384

Ч

288, 320

Ч

240 (QVGA),

256

Ч

192, 160

Ч

120 (QQVGA)

Taux de trame maximum 30 FPS max. (QVGA)
Navigateur Internet

Internet Explorer Ver. 5.5 ou 6.0

(Système d’exploitation disponible :
Windows 2000/XP)

Environnements de l’ordinateur

CPU : Pentium III, 1 GHz ou plus

puissant (Pentium 4, 2 GHz ou plus
puissant recommandé)

Mémoire vive (RAM) : 256 Mo ou plus
Taille d’affichage : 1024

×

768

Accès utilisateur maximum

En mode JPEG : 20 utilisateurs
En mode MPEG4 : 10 utilisateurs

Sécurité réseau

Mot de passe (authentification de

base), filtrage IP

Personnalisation de page d’accueil

Démarrage depuis une page d’accueil

de la mémoire flash embarquée ou
d’une carte CF possible.

Autres fonctions

Détection d’activité, Cropping, Horloge

embarquée, etc.

Caméra

Dispositif d’image

CCD couleur 1/4 pouce

Éléments d’image utiles 330 000 environ
Objectif intégré

3

×

(rapport de zoom)

Longueur de focale : f = 3,4 à

10,2 mm,

Nombre F maximum : F (côté WIDE)

2,8 à F (côté TELE) 3,9

Angle de vue : 20°–55,8°

(horizontalement), 15,1°–43,3°
(verticalement)

Distance de prise de vue:

côté WIDE 0,4m,
côté TELE 1,4m

Éclairage minimum

3,5 lx (AGC ON, F2,8, 30IRE)

Résolution horizontale

400 lignes TV

S/N vidéo

–48 dB

Vitesse d’obturation

1 à 1/10 000 s

Mécanisme

Panoramique

–60° à +60°, Vitesse maximale, 90°/

seconde

Inclinaison

–65° à +10°, Vitesse maximale, 90°/

seconde

Interface

Port réseau

10BASE-T/100BASE-TX (RJ-45)

Port I/O (E/S)

Entrée de capteur :

×

2, contact de

fermeture

Sorties d’alarme :

×

1, 24 V CA/CC

max., 1 A (sorties de relais
mécanique électriquement isolées
de la caméra)

Sortie vidéo

Mini-fiche (1,0 Vc-c, 75 ohms,

asymétrique, sync négative)

*

Utilisez un câble AV avec mini-fiche
à 3 broches AV ou mini-fiche à 4
broches AV. Il n’est pas possible
d’utiliser un câble vidéo avec mini-
fiche monaurale.

Fente carte CF

Prise en charge du Type I/Type II

Micro intégré

Microphone à électret

(omnidirectionnel)

Entrée de micro

Mini-fiche (mono)
Micro auto-alimenté pris en charge

(tension nominale : 2,5 V CC)

Impédance de charge recommandée

2,2 k ohms

Sortie de ligne

Mini-fiche (mono), Niveau de sortie

maximum : 1 V rms

Autres informations

Alimentation

12 V CC

Puissance consommée

6,2 W

Température de fonctionnement

0 °C à +35 °C (32 °F à 95 °F)

Humidité de fonctionnement

20 à 80 %

Température de stockage

–20 °C à +60 °C (–4 °F à +140 °F)

Humidité de stockage

20 à 95 %

Poids

Caméra : 380 g (13,4 oz) environ
Socle : 360 g (12,7 oz) environ

Dimensions (

L

)

Caméra : 130

Ч

130

Ч

110 mm

(l/h/p) (5

1

/

8

Ч

5

1

/

8

Ч

4

3

/

8

pouces)

pièces saillantes non comprises

Socle : 130

Ч

178

Ч

142 mm (l/h/p)

(5

1

/

8

Ч

7

1

/

8

Ч

5

5

/

8

pouces)

Accessoires fournis

Adaptateur secteur MPA-AC1 (Sony) (1), Cordon d’alimentation
(1), Socle (1), Platine de montage mural (1), Pied en
caoutchouc (4), Sangle anti-chute (1), Vis taraudeuse (3),
CD-ROM (Guide de l’utilisateur et programmes fournis) (1),
Manuel d’installation (1)

Accessoires en option

Carte reseau local sans fil

SNCA-CFW1

Antenne pour carte réseau sans fil

SNCA-AN1

Adaptateur Memory stick Duo correspondant à la fente

Compact Flash

TM

MSAC-MCF1

Memory stick Duo

MSX-M512S (512MB)

La conception et les spécifications sont susceptibles d’être
modifiées sans préavis.

Remplacement régulier de pièces

Certaines pièces de ce produit (condensateur électrolytique,
par exemple) doivent être remplacées régulièrement car leur
durée de service est limitée.
La durée de service des pièces diffère selon l’environnement
ou les conditions d’utilisation du produit et la durée
d’utilisation. Aussi, recommandons-nous d’effectuer des
vérifications régulières.
Pour plus d’informations, consultez votre revendeur.

47 (1

7

/

8

)

6.5 (

9

/

32

)

3-20˚

16

(

21

/

32

)

83.5 (3

3

/

8

)

ø84.5 (8

3

/

8

)

Wiring hole
Orifice de câblage

Convexity part /
Partie convexe

Concavity part /
Partie concave

Advertising