Sony DSR-V10 - Manuel (Page 60)

60
Others
Symptom
While editing using the DV connecting
cable, recording picture cannot be
monitored.
The VCR becomes warm.
No function works though the power is
on.
The numbers or letters of 5 characters is
displayed as a counter.
AC adaptor/charger
Symptom
The VCR/CAMERA or CHARGE lamp
does not light.
The CHARGE lamp flashes.
Corrective actions
• Disconnect the power cord. After about one minute,
reconnect the power cord. (p. 11)
• See the chart on the next page.
Trouble check
Cause and/or corrective actions
• Disconnect the DV connecting cable, and connect it
again.
• If the power of the VCR is on for a long time, it
becomes warm, which is not malfunction.
• Disconnect the connecting plug on the AC adaptor/
charger or the battery pack, then reconnect it in about
one minute. Turn the power on. If the functions still
do not work, press the RESET button at the bottom of
the VCR using a sharp-pointed object. (If you press
the RESET button, all the settings including the date
and time return to the factory setting.) (p. 7)
• Self-diagnosis function was activated.
m See the table in page 62 and treat the VCR
apropriately.