Recording from a vcr or tv – Sony DSR-V10 Manuel d'utilisation

Page 37

Advertising
background image

37

Advanced operations /Opérations avancées

Recording from a VCR or TV

Notes on connection
•If the (recording) VCR is a monaural type,

connect the yellow plug of the A/V connecting
cable for video to the VCR. Connect only the
white or red plug for audio to the VCR. If you
connect the white plug, the sound is L (left)
signal. If you connect the red plug, the sound is
R (right) signal.

• If you are going to connect the VCR using the

S video cable [a], you do not need to connect
the yellow (video) plug of the A/V connecting
cable [b].

•If the S video jack is not provided on the TV or

VCR, do not connect the S video cable to this
VCR. Pictures will not appear.

To stop recording

Press π.

Notes on recording
•You cannot record a picture that has a

copyright control signal for copyright
protection of software. “COPY INHIBIT”
appears if you try to record such a picture.

•If the VCR is kept in recording pause mode for

more than five minutes, it automatically stops.

To reset the time code

Press TC RESET.

Enregistrement au départ
d’un magnétoscope ou d’un
téléviseur

Remarques sur le raccordement
•Si le magnétoscope (enregistreur) est de type

monaural, branchez la fiche jaune (signal vidéo)
du câble de connexion A/V sur le
magnétoscope. Pour le signal audio, raccordez
uniquement la fiche blanche ou rouge au
magnétoscope. Si vous raccordez la fiche
blanche, le son est transmis par le signal L
(gauche). Si vous raccordez la fiche rouge, le
son est transmis par le signal R (droit).

•Si vous comptez raccorder le magnétoscope au

moyen du câble S-VIDEO [a], vous ne devez
pas raccorder la fiche jaune (vidéo) du câble de
connexion A/V [b].

•Si le téléviseur ou le magnétoscope ne comporte

pas de prise S-VIDEO, ne raccordez pas le câble
S-VIDEO à ce magnétoscope. L’image ne
s’afficherait pas.

Pour arrêter l’enregistrement

Appuyez sur

π.

Remarques sur l’enregistrement
•Vous ne pouvez pas enregistrer une image

comportant un signal de contrôle de droits
d’auteur pour la protection des données
logicielles. Si vous essayez d’enregistrer une
telle image, le message “COPY INHIBIT”
(“copie interdite”) s’affiche.

•Si le magnétoscope reste en mode de pause

d’enregistrement pendant plus de cinq minutes,
il s’arrête automatiquement.

Pour réinitialiser le code temporel

Appuyez sur TC RESET.

Advertising