Playing back a tape, Lecture d’une cassette – Sony DSR-V10 Manuel d'utilisation

Page 14

Advertising
background image

14

Playing back a tape

Using a Remote Commander

You can operate this VCR using a Remote
Commander supplied with a Sony product.
Set COMMANDER in the menu system
according to the remote control code of the Sony
product.

Note on the beep sound
A beep sounds when you turn the power on.
Several beeps also sound as a warning of any
unusual condition of the VCR.
Note that the beep sound is not recorded on the
tape. If you do not want to hear the beep sound,
select OFF in the menu system.

Cautions on the LCD panel
•Do not push nor touch the LCD when moving

the LCD panel.

•Do not pick up the VCR by the LCD panel.
•Do not place the VCR so as to point the LCD

screen toward the sun. The LCD panel may be
damaged. Be careful when placing the VCR
under sunlight or by a window.

Lecture d’une cassette

Utilisation d’une télécommande

Vous pouvez exploiter ce magnétoscope à l’aide
d’une télécommande fournie avec un produit
Sony.
Réglez COMMANDER dans le menu système en
fonction du code de télécommande du produit
Sony.

Remarque sur les bips sonores
Un bip sonore retentit à la mise sous tension.
Plusieurs bips retentissent également pour vous
avertir d’une situation anormale du
magnétoscope.
Les bips sonores ne sont pas enregistrés sur la
cassette. Si vous ne souhaitez pas entendre les
bips sonores, sélectionnez OFF dans le menu
système.

Précautions concernant le panneau LCD
•N’appuyez pas et ne touchez pas l’écran LCD

lorsque vous déplacez le panneau LCD.

•Ne saisissez pas le magnétoscope par le

panneau LCD.

•Ne placez pas le magnétoscope de façon à ce

que l’écran LCD soit tourné vers le soleil. Le
panneau LCD risque sinon de subir des
dommages. Soyez prudent lorsque vous placez
le magnétoscope au soleil ou à côté d’une
fenêtre.

Advertising