Step 2 setting the date and time, Etape 2 r é glage de la date et de l ’heure, Etape 2 réglage de la date et de l’heure – Sony DCR-TRV355E Manuel d'utilisation

Page 37

Advertising
background image

37

Getting Started Préparatifs

Step 2 Setting the

date and time

Set the date and time when you use your
camcorder for the first time.
“CLOCK SET” will be displayed each time when
you set the POWER switch to CAMERA or
MEMORY unless you set the date and time
settings.*

If you do not use your camcorder for about
three months
, the date and time settings may be
cleared from memory (bars may appear) because
the built-in rechargeable battery will have been
discharged (p. 334).
Set the date and time after charging the built-in
battery fully.

Set the year, then the month, the day, the hour
and then the minute.

(1) Set the POWER switch to CAMERA or

MEMORY, and then press MENU to display
the menu settings.*

(2) Turn the SEL/PUSH EXEC dial to select

CLOCK SET in

, then press the dial.

(3) Turn the SEL/PUSH EXEC dial to select the

desired year, then press the dial.

(4) Set the month, day and hour by turning the

SEL/PUSH EXEC dial and pressing the dial.

(5) Set the minute by turning the SEL/PUSH

EXEC dial and pressing the dial by the time
signal. The clock starts.

(6) Press MENU to make the menu settings

disappear.

* Modes on the POWER switch vary depending

on models (p. 26).

La première fois que vous utilisez le caméscope,
réglez la date et l’heure.
“CLOCK SET” s’affiche chaque fois que vous
mettez le commutateur POWER sur CAMERA
ou MEMORY, à moins que vous ne régliez la
date et l’heure.*

Si vous n’utilisez pas le caméscope pendant trois
mois environ
, la date et l’heure peuvent s’effacer
de la mémoire (des barres peuvent apparaître)
parce que la batterie rechargeable intégrée de
votre caméscope s’est déchargée (p. 334).
Réglez la date et l’heure après avoir chargé
complètement la batterie intégrée.

Réglez l’année, le mois, le jour, l’heure, puis les
minutes.

(1) Réglez le commutateur POWER sur

CAMERA ou MEMORY, puis appuyez sur
MENU pour afficher les réglages de menu.*

(2) Tournez la molette SEL/PUSH EXEC pour

sélectionner CLOCK SET dans

, puis

appuyez sur la molette.

(3) Tournez la molette SEL/PUSH EXEC pour

sélectionner l’année souhaitée, puis appuyez
sur la molette.

(4) Réglez le mois, le jour et l’heure en tournant

la molette SEL/PUSH EXEC, puis appuyez
sur la molette.

(5) Réglez les minutes en tournant la molette

SEL/PUSH EXEC et en appuyant sur la
molette au signal sonore. L’horloge démarre.

(6) Appuyez sur MENU pour quitter les réglages

de menu.

* Les modes indiqués sur le commutateur

POWER varient selon les modèles (p. 26).

Etape 2 Réglage de la

date et de l’heure

Advertising
Ce manuel est liée aux produits suivants: