Self-diagnosis display – Sony DCR-TRV355E Manuel d'utilisation

Page 301

Advertising
background image

301

Troubleshooting Dépannage

5-digit display

Cause and/or Corrective Action

• You are using a battery pack that is not an “InfoLITHIUM”

battery pack.

c Use an “InfoLITHIUM” battery pack (p. 31, 325).

• Moisture condensation has occurred.

c Eject the cassette and leave your camcorder for at least one

hour to acclimatise (p. 331).

• The video heads are dirty.

c Clean the heads using the Sony V8-25CLD cleaning cassette

(optional) (p. 332).

• A malfunction other than the above that you can service has

occurred.

c Eject the cassette and insert it again, then operate your

camcorder.

c Disconnect the mains lead of the AC Adaptor or remove the

battery pack. After reconnecting the power source, operate
your camcorder.

• A malfunction that you cannot service has occurred.

c Contact your Sony dealer or local authorised Sony service

facility and inform them of the 5-digit code. (e.g. E:61:10)

If you are unable to rectify the problem even if you try corrective actions several times, contact your
Sony dealer or local authorised Sony service facility.

Your camcorder has a self-diagnosis display function.
This function displays the current state of your
camcorder as a 5-digit code (a combination of a letter
and numbers) on the screen.
If a 5-digit code is displayed, check the following list
of codes. The last two digits (indicated by ss) differ
depending on the state of your camcorder.

LCD screen or viewfinder

C:04:ss

C:21:ss

C:22:ss

C:31:ss

C:32:ss

E:20:ss

E:61:ss

E:62:ss

C:21:00

Self-diagnosis display

• C:ss:ss

You can service your camcorder
yourself.

• E:ss:ss

Contact your Sony dealer or local
authorised Sony service facility.

English

Self-diagnosis display

Advertising
Ce manuel est liée aux produits suivants: