Sony BTA-NW1A - Manuel (Page 8)

8-
GB
Preparing the unit
Before using the unit, carry out the following preparations. If the plug of the exclusive
modem cable does not match the telephone terminal jack, attach an optional plug
adaptor. The plug of the exclusive modem cable is an RJ-11 plug.
Installing the exclusive modem card and exclusive modem cable
to the Modem Adaptor with Bluetooth Function
(1) Insert the exclusive modem card firmly, with the v mark facing upward, into
the slot.
z Tip
Once you insert the exclusive modem card, you can use the unit without ejecting
the exclusive modem card.
(2) Connect the exclusive modem cable to the exclusive modem card and the
telephone terminal jack.
To eject the exclusive modem card
Push down the exclusive modem card eject switch.
Note
Do not eject the exclusive modem card while the POWER lamp is lit or flashing.
Preparing the power supply
You can use either size AA alkaline dry batteries or the supplied AC power adaptor as
the power source. However, we recommend that you use the supplied AC power
adaptor.
1 2
Exclusive modem card eject switch
v mark
To the telephone
terminal jack
Incorrect
installation Correct
installation