Sony BTA-NW1A Manuel d'utilisation

Page 16

Advertising
background image

16-

GB

Communication

Symptom

Cause and/or solution

• The exclusive modem card is not inserted properly.

c Insert it properly. See “Preparing the unit” on page 8.

• The size AA alkaline dry batteries are completely dead.

c Replace them with new size AA alkaline dry batteries.

• The setup of the AREA CODE switches is wrong.

c Set them up correctly. See “Setting up the unit” on page

10.

• The position of the TONE/PULSE10/PULSE20 selector is

wrong.

c Set it to the appropriate position. See “Setting up the

unit” on page 10.

• The unit is not searched when the BONDING/NORMAL

switch is set to NORMAL.

c Set it to BONDING.

• While the unit is communicating with another Bluetooth

device, the unit may not be searched or may not be able to
communicate with the Bluetooth device.

c Check whether or not the unit is communicating with

another Bluetooth device.

• The communication distance may have to be less than

10 m (32.8 feet) depending on obstacles between the
devices or on radio wave conditions.

c Change the location of the unit, or shorten the distance

between the Bluetooth devices.

• While the unit is communicating with another Bluetooth

device, the unit may not be searched or may not be able to
communicate with the Bluetooth device.

c Check whether or not the unit is communicating with

another Bluetooth device.

The unit cannot communicate with
Bluetooth devices.

The unit cannot be searched when
a new scanning is done.

Even if the unit and the Bluetooth
device are located within 10 m
(32.8 feet), the communication may
not be established or may be
interrupted during the
communication.

Troubleshooting

Advertising