Operating the components – Sony RM-TP1 Manuel d'utilisation

Page 11

Advertising
background image

11

GB

Basic Operations

4

Touch IR SETUP in the pull-down
menu.

The IR SETUP: CATEGORY screen
appears.

5

Select the component category (“VCR”
for example).

To display other items, use the jog dial, or
touch v or V to scroll through the list. The
IR SETUP: MAKER CODE screen appears.

6

Select the maker and the command
mode for the component (“Sony VTR1”
for example).

See “Maker compatibility list” on page 36.
The component selected in steps 5 and 6
will be registered at the remote (component)
selected in step 2, and the screen for the
selected category appears. The IR setting is
displayed at the bottom of the screen.

A long beep sound is emitted to indicate
that registration was successful. Operation
is now possible from the RM SELECT
screen.

To stop registration at any time

Touch EXIT or CANCEL during any step.

Notes

• Depending on the maker, certain remote codes may

not exist and cannot be operated with the keys
(icons) on the screen. These keys are dimmed.

• When registering components made by certain

manufacturers, some commands may not function
even though they are displayed.

• Depending on the model or the model year, you

cannot operate the component even it is listed in the
“Maker compatibility list”. In this case, you can use
the Learning function to program the commands of
the remote supplied with the component (page 25).

Operating the components

Selecting the remote
(component)

To operate the registered components, first
display the RM SELECT screen, then select the
remote (component) you want to operate (CD,
MD, etc.).

1

Touch RM SELECT.

The RM SELECT screen appears.

2

Touch the remote (component) you
want to operate.

Or, turn the jog dial to select the remote
(component), then press the jog dial to enter
the selection. The screen for operating the
component appears. Touch

B or b to

display other screens. See the tables on
pages 12–17 for information on the
displayed keys.
To display other items, use the jog dial, or
touch v or V to scroll through the list.

Tips

• You can change the name of remotes (components)

(page 28).

• On the last screen for each remote (component),

there are 8 keys specially for use with the Learning
function (USER RESERVE KEYS). You can use
these keys for programming additional remote
codes (page 27).

continued

Advertising