Flash sync speed – Sony HVL-F56AM Manuel d'utilisation

Page 98

Advertising
background image

36

3

Press the + or – button to select

.

4

Press the select button repeatedly until blinking stops.

• “HSS” remains on the data panel.
• High-speed sync is cleared when

is selected with the

procedure described above, and a shutter speed faster than the sync
speed can no longer be set.

• It is recommended that photos be taken in bright locations. When

photographing in dark areas the shutter speed will not exceed the
sync speed, even when

is selected.

• The flash range with high-speed sync is smaller than for normal

flash photography. Make sure that the subject is within the
displayed flash range before taking the photo.

• High-speed sync cannot be used with multiple flash or bounce flash

in the upwards, left, and right directions.

• When using a flash meter or color meter, high-speed sync cannot be

used because it interferes with proper exposure. Either select
to clear it or select a shutter speed lower than the sync speed.

Flash Sync Speed

Flash photography is generally associated with a maximum shutter
speed referred to as the flash sync speed. This restriction does not
apply to cameras designed for high-speed sync (HSS) photography
(p. 35), since they allow flash photography at the maximum shutter
speed of the camera.

Advertising