Sony MSAC-PC3 - Manuel (Page 24)

MSAC-PC3 3-078-326-12(1).US/FR
24-US
B How to Use (When using Macintosh)
Connecting this unit to your computer
and installing drivers
It can be used with OS standard device drivers.
Perform operations according to the following steps.
1
Turn on the power to your computer and start up the MacOS.
2
Firmly insert the unit with the “Memory Stick” attached until
it reaches the back of your computer’s PC card slot.
For connection of the unit to your computer, refer to page 9.
3
Driver installation will start automatically and drivers will be
installed on your computer.
4
When driver installation is complete, a Memory Stick icon will
be displayed on your desktop and you can use the unit.
Disconnecting this unit from your
computer
1
Close the software using this product.
2
Make sure that the unit’s access lamp is not lit.
3
Move the Memory Stick icon to the [Trash].
When the Memory Stick icon is selected, choose “Uninstall” in
the [Special] menu at the top left of the screen.
4
Remove the unit from your computer.
P Note
Do not remove the “Memory Stick” from the unit while the access lamp is
flashing or “Memory Stick” data may be corrupted.