Connecting the projector, Connecting the power cord, Connecting the projector to a computer – Sharp PG-M15X Manuel d'utilisation

Page 15

Advertising
background image

Setup & Connections

13

Connecting the Power Cord

Plug the supplied power cord into the AC socket on the side of the projector.

Power cord

Connecting the Projector

CAUTION

• Make sure you connect the power cord firmly into the AC socket.

Connecting the Projector to a Computer

You can connect your projector to a computer for projection of full color computer images.

Connecting a computer to the projector using the DVI digital cable—Digital connection instructions

1 Connect one end of the DVI digital cable (sold

separately) to the DVI-DIGITAL/ANALOG INPUT 1 port
on the projector.

2 Connect the other end to the Monitor output port (DVI)

on the computer. Secure the connectors by tightening
the thumb screws.

3 To use the built-in audio system, connect one end of

the supplied PC audio cable to the AUDIO INPUT
terminal on the projector.

4 Connect the other end to the audio output terminal on

the computer.

CAUTION

• Before connecting, be sure to turn both the projector and the

computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.

• Please read the computer’s operation manual carefully.
• Refer to page 53 “Computer Compatibility Chart” for a list of

computer signals compatible with the projector. Use with
computer signals other than those listed may cause some of
the functions not to work.

• This DVI port is DVI version 1.0 compatible. Therefore when the

signal is input from copy guard system compatible (DVI version
2.0) equipment, no signal will be received.

PC audio cable

Computer

Projector

PC audio cable

1

4

2

3

DVI digital cable

(sold separately)

Model name AN-C3DVU

Projecting the image
When connecting with this method,
press INPUT on the remote control or
the projector and select the input signal
type to INPUT 1 DVI (Digital).

Advertising