Sharp PN-655U - Manuel (Page 29)

ENGLISH
27
E
Settings and Adjustments
■ ADJUSTMENT (ANALOG)
The menu will differ depending on the input mode. For the menu items displayed for each input mode,
refer to pages 59 to 61.
[MANUAL / AUTO]
Function
Adjusts CLOCK, PHASE, H-POS (horizontal positioning), and V-POS (vertical
positioning) are adjusted.
Adjustable range MANUAL/AUTO
MANUAL
The CLOCK, PHASE, H-POS, and V-POS are manually adjusted. You can use the
adjustment pattern on the supplied CD-ROM to adjust each parameter.
For more information, refer to “Adjustments for PC screen display” on page 35.
AUTO The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.
Use this automatic adjustment when you use the PC analog RGB input terminal to
display a PC screen for the first time or when you change the setting of the PC.
(See page 35.)
[MANUAL (CLOCK)]
Function
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 35), make adjustments so that no
vertical stripe noise appears in it.
Adjustable range 0 - 255
+ direction
Clock frequency increases.
– direction Clock frequency decreases.
[MANUAL (PHASE)]
Function
Adjusts sampling clock phase for applicable video.
Useful when small characters appear with low contrast and/or there are flickers at
corners. When using the adjustment pattern (see page 35), make adjustments so
that no horizontal stripe noise appears in it.
Adjustable range 0 - 255
+ direction
Advances clock phase.
– direction Delays clock phase.
[MANUAL (H-POS)]
Adjustable range 0 - 255
+ direction
Image shifts right.
– direction Image shifts left.
[MANUAL (V-POS)]
Adjustable range 0 - 255
+ direction
Image shifts up.
– direction Image shifts down.
[RESET]
Adjustable range • / RESET
RESET
Resets the values of the ADJUSTMENT menu items to the factory preset values.
When is pressed, the values are reset (initialized).