English, Analog connection with a pc (input mode: analog) – Sharp PN-655U Manuel d'utilisation

Page 15

Advertising
background image

ENGLISH

13

E

Analog connection with a PC (Input mode: ANALOG)

A PC screen can be displayed with the PC analog RGB input terminal.

• Connect to the display (analog RGB) output terminal on your PC using a PC analog signal (RGB)

cable (commercially available).

• Connect with an audio output terminal on your computer using a PC audio cable (commercially

available).

• Select the input mode “ANALOG” for this connection. (See page 22.)
• Use the automatic screen adjustment when you use this connection to display a PC screen for the

first time or when you change the setting of the PC. (See page 35.)

Audio

Display

Output terminals on

connected equipment

PC audio input terminal

PC analog
RGB input terminal

PC analog signal (RGB) cable (commercially available)

PC audio cable (commercially available)

▼ Rear view

• Auto-detects sync signal type.
• Sync signal presence is detected in this order: Composite sync, Horizontal/Vertical separate, and

Sync-on-green. If for some reason both Composite sync and Horizontal/Vertical separate are not input,
the system will operate assuming that the signal is a Sync-on-green (i.e. that the sync signal is
contained in the G signal of RGB). With some types of video signal, this may result in an unstable
image.

• See page 56 for compatible signal timing.

Advertising