Sharp PN-655U - Manuel (Page 14)

12
E
Connecting Peripheral Equipment
This section describes the terminals of the monitor.
Be sure to set the main power switch to “OFF (O)” (see page 21) and disconnect the plug from the
power outlet (see page 17) before connecting or disconnecting the cables.
Digital connection with a PC (Input mode: DIGITAL)
A PC screen can be displayed with the PC digital RGB (DVI-D) input terminal.
• Connect to the digital RGB output terminal on your PC using a digital signal (DVI) cable
(commercially available).
* Connection with computers that have an output terminal (DVI-D 24 pin or DVI-I 29 pin) conforming to DVI is
possible. (However, images may not display properly depending on the computer.)
• Connect with an audio output terminal on your computer using a PC audio cable (commercially
available).
• Select the input mode “DIGITAL” for this connection. (See page 22.)
Digital signal (DVI) cable (commercially available)
PC audio cable (commercially available)
Audio Digital RGB
Output terminals on
connected equipment
PC digital RGB input terminal
PC audio input terminal
▼ Rear view
• See page 56 for compatible signal timing.