Models available, Product dimensions and clearances, Tools required – GE Built-In Compactors GCG1700 II Manuel d'utilisation
Page 3: Parts supplied, Design information, Product dimensions and clearances parts supplied
TOOLS REQUIRED
•Level
•Phillips screwdriver
•Pliers
•Gloves
•Measuring tape
MODELS AVAILABLE
GCG1580 SS
GCG1500 BB
GCG1500 WW
GCG1700 II*
ZCGS150 SS
ZCGP150 II*
*For ZCGP150 II and GCG1700 II, also refer
to the instructions provided on the
template packed with those models.
3
Design Information
PRODUCT DIMENSIONS AND CLEARANCES
PARTS SUPPLIED
• 6 mounting screws,
#8-18, 12" (1.3 cm) long
• 2 countertop retaining
brackets
• 2 side-mounting clips
• Door toekick
• Top toekick
• Base toekick
34” (86.4 cm)
to
35” (88.9 cm)
15”
(38.1 cm)
min.
24”
(61 cm)
min.
Locate the outlet 18” (45.7 cm) min.
from the floor, 3” (7.6 cm) min. from
either side
33-3/4”
(85.8 cm)
min.
to
35” (88.9 cm)
max.
14-7/8” (37.8 cm)
23” (58.4 cm)
• Allow 23
″ (58.4 cm)
clearance at the front for
a full drawer opening.
• Allow 6
″ (15.2 cm)
clearance on the right
side to the nearest
vertical wall or cabinet
for bag removal.
• Note: This compactor is
designed for built-in
applications only.