GE 21028 Manuel d'utilisation

Move near to base confirm 1yes 2no, Deregistration 1yes 2no, Fcc rf r

Advertising
background image

Extra Handset and Recharge Cradle
with Call-Waiting Caller ID for Use with
Models 21018, 21028 and 21098
User’s Guide

We bring good things to life.

21009

I

MPORTANT

I

NFORMATION

NOTICE: This product meets the applicable Industry Canada
technical specifications.

The equipment must be installed using an acceptable method of
connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some
situations.

Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and internal
metallic water pipe systems, if present, are connected together. This
precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.

NOTES: This equipment may not be used on coin service provided
by the telephone company.

I

NTERFERENCE

I

NFORMATION

This equipment generates and uses radio frequency energy which
may interfere with residential radio and television reception if not
properly installed and used in accordance with instructions
contained in this manual. Reasonable protection against such
interference is ensured, although there is no guarantee this will not
occur in a given installation. If interference is suspected and verified
by switching this equipment on and off, the user is encouraged to
try to correct the interference by one or more of the following
measures: Reorient the radio/television receiver’s antenna, relocate
the equipment with respect to the receiver, plug the equipment and
receiver into separate circuit outlets. The user may also wish to
consult a qualified radio/television technician for additional
suggestions. This equipment has been fully tested and complies
with all limits for Class B computing devices pursuant to part 15 FCC
Rules and Regulations. This device complies with RSS-210 of
Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) This
device must accept any interference, including interference that may
cause undesired operation of the device.

FCC RF R

ADIATION

E

XPOSURE

S

TATEMENT

This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a mininum distance of 20 centimeters
between the radiator and your body. This transmitter must not be
co-located or operated in conjunction with any other antenna or
transmitter.

For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines when used with the belt clip supplied
with this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.

H

EARING

A

ID

C

OMPATIBILITY

(HAC)

This telephone system meets FCC/Industry Canada standards for
Hearing Aid Compatibility.

P

ROGRAMMING

THE

T

ELEPHONE

H

ANDSET

R

EGISTRATION

CAUTION:

The extra handset must be registered before use.

NOTE:

This extra handset is only compatible with the GE

Models 21018, 21028 and 21098 series.

When registering a handset, make sure all handsets in the system
are OFF (not in talk mode) or registration process will fail.

During the registration process, keep your handset near the base.

When your handset displays:

1. Press the MUTE/PROG button and

HOLD BASE PAGE WAIT FOR

BEEP shows in the display.

2. Press and hold the page button on the base of Models 21018,

21028 or the page/int button on the base of Model 21098 until you
hear a long beep. The handset displays

HANDSET #

REGISTERED followed by HANDSET NAME.

3. The handset number (1 to 4) is assigned. You may also give the

handset a specific identifying name.

H

ANDSET

N

AME

1. Use the touch-tone keypad to enter the name (up to 15 characters).

More than one letter is stored in each of the number keys. For
example, to enter the name Bill Smith, press the 2 key twice for the
letter B. Briefly pause and the cursor moves to the next field. Press
the 4 key 3 times for the letter I. Briefly pause and the cursor moves
to the next field. Press the 5 key 3 times for the second letter L.
Briefly pause and the cursor moves to the next field. Press the 5 key
3 times for the second letter L, press 1 key to add a space between
the first and last name. Press the 7 key 4 times for the letter S.
Briefly pause and the cursor moves to the next field. Press the 6 key

I

NTRODUCTION

CAUTION:

When using telephone equipment, there are

basic safety instructions that should always be followed. Refer
to the IMPORTANT SAFETY INSTRUCTIONS provided with
this product and save them for future reference.

Congratulations on purchasing this extra GE cordless handset with Call
Waiting Caller ID. This telephone has been designed to be simple to
use, however, you can reach its full potential more quickly by taking a
few minutes to read this instruction book. This telephone is a
multifunction product for use with Call Waiting and Caller ID services
available from your local telephone company.

Your Call Waiting Caller ID phone allows you to:

view the name and telephone number of a caller while you are on
the phone (Call Waiting Caller ID).

identify callers before you answer the phone.

view the time and date of each incoming call.

record up to 40 Caller ID messages sequentially in each handset.

know who called while you are on the other line or when you
were away.

screen unwanted calls, eliminate harassment from annoying
calls, or to get prepared before answering a call.

IMPORTANT:

Because cordless phones operate on electricity,

you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.

IMPORTANT:

In order to use all of the features of this

telephone, you must subscribe to two separate services available
from your local telephone company: the standard Name/
Number Caller ID Service to know who is calling when the
phone rings and Call Waiting Caller ID Service to know who is
calling while you are on the phone.

INSTALLATION NOTE:

Some cordless telephones operate at

frequencies that may cause or receive interference with nearby TVs,
microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away
from these appliances. Certain other communications devices may
also use the 2.4 GHz frequency for communication, and, if not
properly set, these devices may interfere with each other and/or
your new telephone. Typical devices that may use the 2.4 GHz
frequency for communication include wireless audio/video senders,
wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.

once for the letter M. Briefly pause and the cursor moves to the next
field. Press the 4 key 3 times for the letter I. Briefly pause and the
cursor moves to the next field. Press the 8 key for the letter T. Briefly
pause and the cursor moves to the next field. Press the 4 key twice
for the letter H.

NOTE:

If you make a mistake press the delete button to

backspace and erase the wrong character(s).

NOTE:

Press MUTE/PROG button once to skip this step and

exit to standby screen.

2. Press the MUTE/PROG button to save. You will hear a

confirmation tone, and the display returns to the main menu.

H

ANDSET

D

E

-

REGISTRATION

Deregistration cancels a handset’s registration. If you do not know a
handset’s name, you should deregister the handset according to the
steps below. During the de-registration process, keep the handset
near the base.

WARNING:

It is not recommended that a handset be de-

registered unless absolutely necessary because once a
handset is de-registered, that handset's telephone features
cannot be used until the handset is re-registered.

1. Make sure your handset is in menu mode and make sure your

phone is OFF (not in talk mode).

2. Press the MUTE/PROG button to display main menus:

ROOM

MONITOR and HANDSET SETUP.

3. Use CID down button to locate to

HANDSET SETUP and then

press MUTE/PROG button to select.

4. Use CID up/down button to locate the

DEREGISTRATION and then

press MUTE/PROG button to select.

5. Then, handset shows

DEREGISTRATION 1 YES 2NO shows in the display.

6. Use the touch-tone pad to enter

1YES or use CID/VOL ( or )

button to scroll to

1YES.

7. Press MUTE/PROG and

MOVE NEAR TO BASE displays until you

move the handset closer to the base.

Then the handset displays

CONFIRM? 1YES 2NO.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK
DO NOT OPEN

WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.

THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.

CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.

CAUTION:

H

ANDSET

AND

C

HARGE

C

RADLE

L

AYOUT

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.

Never touch non-insulated telephone wires or terminals, unless
the telephone line has been disconnected at the network
interface.

Use caution when installing or modifying telephone lines.

Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems.

I

MPORTANT

I

NSTALLATION

G

UIDELINES

Install telephone near an electrical power outlet.

Avoid sources of noise, such as a window by a busy street, and
electrical noise, such motors, microwave ovens, and fluorescent
lighting.

Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.

Avoid areas of excessive moisture or extremely low temperature.

Avoid dusty locations.

Avoid other cordless telephones or personal computers.

1. Plug the charge cradle power supply into an electrical outlet.

2. Install the handset battery.

NOTE:

You must connect the handset battery before use.

Push down on the top of the battery compartment cover (located
on the back of each handset) and remove the cover.

Lift the battery pack and connect it's plug to the jack inside the
compartment.

NOTE:

It is important to maintain the polarity (black and red wires)

to the jack inside the compartment as shown in the illustration.

Close the battery compartment by pushing the cover up until it
snaps into place.

Place the handset in the charging cradle. The charge indicator
turns on to indicate the battery is charging.

Allow the handset to charge for 16 hours prior to registration to
GE Models 21018, 21028 or 21098. If you don't properly charge
the phone, battery performance is compromised.

NOTE:

If the battery is not properly installed in the handset, or

if the battery pack is not properly connected to the jack inside
the battery compartment. "NO BATTERY" shows in the display
when the handset is placed in the charging cradle.

IMPORTANT:

After you place the handset in the cradle the

display shows "CHARGING...", then, "SEARCHING...", then
"HANDSET NEEDS REGISTRATION" alternately. Wait until the
handset charges properly, then register the handset to the base as
described below.

MOVE NEAR TO

BASE

CONFIRM

1YES 2NO

Modèle 21009
00001591 (Rév. 1 CAN E)
04-52
Imprimé en Chine

ATLINKS Communications Canada Inc.

© 2004 ATLINKS Communications Canada Inc.

Trademark(s) ® Registered

Marque(s) ® déposée(s

)

DEREGISTRATION

1YES 2NO

B

EFORE

Y

OU

B

EGIN

P

ARTS

C

HECKLIST

Make sure your package includes the items shown here.

I

NSTALLING

THE

P

HONE

IMPORTANT:

Make sure the extra handset is registered

to GE Models 21018, 21028 or 21098 before use. When
registered to GE Models 21018, 21028, or 21098, this
accessory handset supports the same basic features of

the model it accompanies. However, it does NOT support the
Answering Machine features of GE Models 21028 or 21098.
Refer to the GE 21018, 21028 or 21098 instruction book for
detailed installation and operation information.

HANDSET NEEDS

REGISTRATION

HOLD BASE PAGE

WAIT FOR BEEP

HANDSET #

REGISTERED

HANDSET NAME

charge indicator

AC power supply

TALK/END/callback

(button)

display

format/conf button

(format/conference button)

redial (button)

page/int

page/intercom button

flash (button)

*exit (button)

#pause/ringer

(button)

mute/prog

(mute/program button)

mem

(memory button)

del

(delete button)

SPKR

(speaker button)

cid/vol (up or down arrow)

(caller ID/volume button)

Handset

Handset

battery pack

Belt

Clip

Handset charge

cradle

Battery
compartment
cover

BLACK WIRE

RED WIRE

BATTERY

PRESS DOWN
FIRMLY

Advertising
Ce manuel est liée aux produits suivants: